I'll post pics soon.  There's a really sweet spot in the door you'll see if you take the panel off and take a look. ...   04-18-2007 11:18 pm

PS:  Here's the link to the wiring diagrams. http://home.comcast.net/~jrkengr2/html/wiring_diagrams.html They are AWESOME and have helped me out quite a bit. ...   04-18-2007 05:44 pm

I still need to take pics and post them.  I like noise too.  So, I took a sawzall and expanded the door holes just a ...   04-18-2007 05:43 pm

First thing I did was take off the dist cap and make sure it was dry and the contacts were clean.  I'll give that another ...   04-14-2007 03:29 pm

Sounds like you have a sticky float.  I'm not sure that's my trouble. . . ...   04-13-2007 08:38 pm

    Car was running great.  I changed the oil and decided while I was down there I should do a little more degreasing.  I have ...   04-13-2007 03:12 am

PM sent ...   03-15-2007 08:51 pm

Send a note to:  Rejenclassics@aol.com (http://www.rejen.info/main_healey.html) , they sell every interior panel for the Jensen.  I got a quote from them and it was quite ...   03-14-2007 06:09 pm

I think the standard answer is Delta! http://deltamotorsports.com/ No affiliation other than I feel like I own stock in the co since I've given them so much ...   03-07-2007 04:46 pm

As an aside - from you pics it looks like where the tranny tunnel meets the rear ledge you might have had some welding done.  ...   02-20-2007 06:23 pm

Ron - Glad you are ok!  Damn. I see you're looking for a tranny from another post.  I have a 5spd with rear end and ...   02-20-2007 05:44 pm

Anyone else use Diamond wheels?  These look pretty nice for 50 bucks or so a pop.  I even like the looks of them.  ...   02-08-2007 07:01 pm

I have the same mirro on the left - but none on the right.  I heard that British Masters has a nice set of replacements ...   01-29-2007 10:23 pm

    Ok, has anyone done anything to replace that damn black rubber goop that surrounds the dash panel on the driver's side?  I'm considering tearing ...   01-29-2007 10:19 pm

Very very nice.  Only problem is mine's already installed and it looks really damn good - powder coated and all.  So I hate to start ...   01-25-2007 02:29 am

    I'm poking around with installing a pair of harnesses on my car.  The old seat belts are actually gone and there's only a shoulder ...   01-24-2007 01:46 am

Dan: Just a quick thanks for posting all your info!  I'm HOPING to start on the same project in 6 months or so and really appreciate ...   11-13-2006 06:51 pm

While you have it out - toss it in the can and buy a mechanical unit that gives you a real temp reading instead of ...   10-30-2006 05:47 pm

Thanks for the comment.  I got the same info from another source too so I'll be checking that out this weekend. Your cam questions are ...   08-31-2006 11:55 pm

No one with an idea of where to get this data?  or at least the specs so I can figure it out myself. . . ...   08-30-2006 06:18 pm

I'm taking stock of what i have to see what I need. My crank has stamped on it - 7195981  an 'F' and what looks ...   08-26-2006 09:59 pm

thanks for then note.  i'm just looking for a fun street engine with occassional track days.  i'll probably go w/ the JHPS crank. .. ...   08-25-2006 03:13 am

I think I'm about ready to start working on the bottom end of my extra engine.  Can someone tell me what bearings I should get?  ...   08-24-2006 10:11 pm

I have stock exhaust - and I've set off car alarms when I punch it.  ...   08-21-2006 10:58 pm

Whether it's a good idea or not - it's what I had planned to do.  Instead, I ended up taking everything to someone in Orange ...   08-21-2006 03:04 pm

These are the guys.  I had a great experience with them. ...   08-21-2006 05:54 am

His name is Dan Evans and he is on Ebay under 'bull sport'.   I can't seem to find his phone #.  I'll see if I ...   08-21-2006 01:22 am

If you want to pay someone to rebuild and clean them up I suggest contacting Dan at bullsport@toast2.net I think he charged me 175 bucks to ...   08-20-2006 10:22 pm

Call Jim Bean Engineering.  Even if they don't have them they'll give you good advice.  And it's pretty easy to get pistons thru Ross Racing ...   08-11-2006 02:54 pm

I'm going to ask harry to look at it.  it was fine until i had fan rewired and the new temp guage - but the ...   08-09-2006 05:41 am

    Ok, I'll call Viking tomorrow and talk to them but I thought ya'll might have a good comment for me.  I noticed by horn ...   08-08-2006 01:56 am

We did use water wetter - highly recommended by the mechanic by the way.  And, I'm assuming (we all know what that means) that Viking ...   08-03-2006 01:38 am

OK, I'm going to give you a quick synopsis.  I just picked my car up from Viking MotorSports yesterday.  I've been really happy with them ...   08-02-2006 05:49 pm

post pics of your set up when you're done.  i want to do a roll bar sometime soon and i like your idea of using ...   07-24-2006 06:52 pm

Thanks guys.  I talked to both of them.  Britalia charges 80 bucks an hour and Viking charges 105. . .But, the guy at Viking kept ...   05-22-2006 09:25 pm

I talked with an 'older' fella up in the LA area a while back but I can't find his contact info.  I'm looking for someone ...   05-19-2006 10:00 pm

Ok, I just got off the phone w/ a really pleasant fellow who does restoration work (B&A in San Marcos, CA).  i told him ...   03-17-2006 07:55 pm

Thanks for the replies. I measured the clearances (as I understand them) and it looks fine to me.  I may have someone corroberate my ...   03-15-2006 11:16 pm

Does anyone have a link to some photos - or a copy of the Service bulletin that covers the oil pump clearances, etc?  I took ...   03-15-2006 02:50 am

Ok, I'm back after a hiatus. No work done yet. 1st thing I want to do is get rid of the ballast resistor ...   12-23-2005 11:37 pm