Mark will be missed, that is for sure.  I had no idea he was ill.  He was here when I joined the list in 2001 ...   07-24-2007 05:33 pm

http://www.jaeparts.com/ 805.967.5767 Website isn't much but if you give them a call... ...   05-26-2006 11:55 am

I was able to see the color change with the dells.  I had bright orange at idle and put in my smaller jets. Color went ...   05-25-2006 05:28 pm

Hello Ron, I bought one off EBay.  When you see the price you may just want to buy only one.  They go for $50-$60 each.  ...   05-25-2006 12:39 pm

Like I said the Lotus anti-poping plates did it for me. In addition I’d like to recommend using a "colortune" spark plug to actually tune the ...   05-24-2006 12:45 pm

I've got them installed on mine and they seem to work. I've had no popping since they were installed a few years back.  I even ...   05-23-2006 03:10 pm

What was said in private should have been left in private.  This is a fairly small community and when you mention my car publicly I ...   04-26-2006 08:39 pm

Since this remains out there for public consumption (and at this point has been viewed 41 times) I feel I must comment: you said….. “I've only driven ...   04-26-2006 07:34 pm

One rather cleaver technique I remember reading somewhere is to fashion a tool out of steel strip stock shaped like a "j" hook and use ...   03-22-2006 12:24 pm

http://www.its-titles.com/ You may be able to use a title service to get one titled.  ...   03-17-2006 03:23 pm

Woops!   ...   11-16-2005 12:06 pm

I have vinyl and the draw back is it shrinks when it's cold making it difficult to put up when you need it most.  My ...   10-24-2005 12:44 pm

http://www.carbtune.com/ For what it's worth I think this is the best for the Dellorto's (and also the most expensive). It works well, is very accurate, is a joy ...   10-24-2005 12:33 pm

Yes the copper bolts are nice and I also recommend them.  To get at those header bolts it is helpful to unbolt the left motor mount ...   10-18-2005 12:42 pm

I'd be interested as well.  Are there any interference issues with the 15" wheel? Brian ...   08-04-2005 12:27 pm

...   08-03-2005 05:45 pm

Ron, One other thing and sorry if I’m stating the obvious but…… When setting the ignition timing statically make sure to rotate the distributor in the opposite ...   08-03-2005 05:45 pm

Did you happen to notice now that it's running that there are more birds chirping, more butterflies, and the world just seems a better place ...   08-03-2005 02:29 pm

The earlier Girling rear brake systems require periodic manual adjustment. Brian ...   06-16-2005 12:37 pm

Ron, I love what you've done thus far but I've got to say that I am really disappointed in your choice of beer! Keep it up, Brian ...   06-15-2005 10:05 pm

Or go with used, they are listed on eBay all the time. I've never opened up the JH solenoid but some times it is just ...   06-07-2005 12:52 pm

Thanks for the link Adam, You've got to take the "t" out to get to the right site http://www.wescoperformance.com Replacing the seat belts is on my list of ...   06-03-2005 12:22 pm

Dan, now that’s a leak!  Your oil catch pan is an interesting idea.  By the time you break the tranny from the engine and disconnect ...   05-25-2005 12:44 pm

Dan, How bad is the leak?  How much oil are you adding and at what interval? I have the rope seal and mine leaks a ...   05-24-2005 12:50 pm

Brett, A couple of things. I’m running 45’s and by no means am an expert.  But I can share some of my experience. Idle holder size ...   05-23-2005 02:54 pm

OK guys sorry I missed this one.  Adding oil CAN be a Breeze! Just head to your local HW store and buy an electrical 4" octagon ...   05-18-2005 06:00 pm

Hello Brett, Thanks for the reply. The trick to getting windshields out is to cut the sealant with a long knife and jam wood shims ...   05-18-2005 05:41 pm

Hey PC, You are right about the $269.  I was just at there site.  5 yr warenty to boot! I may give them a try. ...   05-18-2005 05:33 pm

I noticed there are new soft tops available on EBay.  It looks like a local (USA) manufacturer has started making tops for us.  They are ...   05-18-2005 01:27 pm

Early this spring I parted out a 74 that I pulled out of a local salvage yard.  The windshield was in good shape so I ...   05-18-2005 01:10 pm

In addition to the above I’d consider having all four spark plug threads heli-coiled with stainless coils.  Doesn’t cost much and you will never have ...   05-03-2005 12:10 pm

Just for grins I thought I’d list my Paeco Cam Grind Spec.  This is what they put in their Stage II modified.   Timing: Intake 44/76, Exhaust ...   05-02-2005 12:27 pm

I think it’s worth noting that one should make sure that whom ever you insure with the policy MUST be for an AGREED value.  Classic ...   04-21-2005 12:33 pm

Beautiful, are the timing pulleys the better “half moon” design or did you just have them anodize? They look like they are adjustable?  Also, I ...   04-20-2005 12:14 pm

I second the Hagerty.com sugestion. I'm with them and am very pleased. I love the quarterly news letter. Brian ...   04-13-2005 11:29 pm

Hello Ben, there was a discussion a while back about plug gap with the Pertronics on the old board.  As I recall a gap of .035” ...   04-13-2005 12:44 pm

Don’t forget your local hardware store.  Some of them have a very complete selection of English and metric fasteners in both steel and stainless.  I ...   04-11-2005 12:25 pm

Sorry the saab link above doesn't take you to the shims (like it did for me).  You'll have to Search their site for Saab 900 ...   04-06-2005 08:09 pm

I found the following on the old board.  I own an old 900 Saab (my Son's car).  I should pull the valve cover off and ...   04-06-2005 08:06 pm

Great question Dan, as I recall the shop manual says NILL about the type of lubrication to use in the rack.  I seem to recall ...   04-06-2005 01:10 pm