My best guess is that you let the Distributer sprocket turn on you when you replaced the belt.  (I know I did it) Therefore your ...   03-28-2006 08:47 pm

Don't do the Bead Blaster you will totally loose the polished look.  Got talked into it and was totally disapointed. When done I had to ...   03-27-2006 01:25 pm

Mark, As always thanks.  I like you have stock cooling all the way and living in Okla. we have high temps.  Just thought it was interesting ...   03-09-2006 05:36 pm

Hi Mark, Great Info you gave Steve.   You said something about aftermarket Fan shroud. Is this something you recomend?   Rory 73 JH 13218   ...   03-09-2006 03:20 pm

Many of the moving companies IE Allied, United, Mayflower have this ability.  In one case I know of they put the car with the furniture. ...   01-04-2006 08:06 pm

Got to agree with Judson, You are Buying a hobby.   From what you have said you are looking at a Very Good stater car to ...   12-23-2005 01:58 pm

Paul You asked "...So suggestions for a suitable bribe most welcome." In my case letting my wife drive it for 5-10 minutes did the trick. After her drive I ...   11-22-2005 01:42 pm

Paul, It will take some force while working the wheel back and forth.  Or if that fails and with a second person (wife works great) using a ...   11-21-2005 08:36 pm

Brett, I thought that also. But I am getting some overflow into the bottle. What I do not know if it is going back into the ...   11-11-2005 09:05 pm

Eric, I have been to the Netherland many times what a beautiful Country (after you get out of Ampsterdam of course) My heat problem could be just ...   11-11-2005 05:56 pm

I will take a picture of it and post. With all the parts that I replaced, the hose are not among them.  Now since the ...   10-18-2005 12:35 am

One interesting thing that I have noticed is that the hose that runs on top of the motor to the thermostat is flattened when the ...   10-17-2005 09:29 pm

Judson, Sorry I mis-spoke. What I was meaning to say was the Exaust Header gasket on # 4 Rory  ...   10-17-2005 06:18 pm

Well looks like I blew a header gasket. Have not looked under the car to see how much of a job it is going to ...   10-16-2005 09:12 pm

I wanted to revisit this temp thing. Finally got my 73 on the road. (There are still things to do with Carb adj and recheck ...   10-16-2005 09:09 pm

Thanks Greg. Thought about the synthetic but I can live with the sound. Kinda adds character. Rory ...   09-21-2005 09:40 pm

Finally got my 73 on the road after 23 years of storage and now that the new exaust system is on I can hear all ...   09-20-2005 02:02 pm

Joel, Just wanted to thank you for the Link to TireRack. Bought 4-HTR 60 x13 Sumitomos from them for U$S 210.00 Delivered to Okla. City. You ...   09-07-2005 07:51 pm

Thanks Joseph.   Just wanted to make sure that I did not need to do a major R & R on the trans. I have replaced the ...   08-18-2005 03:14 pm

Thanks Joseph.   Just wanted to make sure that I did not need to do a major R & R on the trans. I have replaced the ...   08-18-2005 03:14 pm

My 73" JH is up on the stands waiting for my Brake servo assy to be returned from the Rebuilder in Ohio.  Since I have the ...   08-17-2005 05:39 pm

The task to replace the distriburor wire is very simple (IF you pull the distributor) Just use a solid copper 14-18 ga. wire. Can't understand why ...   07-28-2005 03:08 pm

Thanks Sander, I do not like clear coat just for the reasons you stated. There just is no easy way to touch up Rory   ...   05-31-2005 03:59 pm

I am considering repainting only the exterior on my 73-Orange-JH Next Fall/Winter The whole car is in Great Shape with only minor door dings Zero ...   05-25-2005 05:56 pm

Mark, Since the car is down right now for Master Cyl replacement and Servo Rebuild.  And Since I knew it was going to be down I ...   05-25-2005 05:38 pm

Guys I went around and around on this issue. For my Early 73-JH at 110/110 the heat build up was BAD and it ran bad. ...   05-25-2005 02:42 pm

Have mine with State Farm  Full coverage $46.00 every 6-months ...   04-20-2005 07:16 pm

Mark, You come through AGAIN. Just finished rebuilding the Carbs and Bang after it warms up it will not return to normal Idle RPM.  It's driving me ...   04-19-2005 09:48 pm

Thanks Perfect Info. I do in deed have 14-15hg at Idle. Now I can move on. Yesterday I had Very little leak. Noticed tonight My ...   04-07-2005 02:56 am

Mark, did this TR-6 M/C conversion include the Servo unit. How do you know the Servo is going bad? I have a Very slight showing of a ...   04-06-2005 10:10 pm

Damp oil same as motor 20-50, Do you know size of hex tool1/16, 3/32nd, 1/8? Have vac meter will check brake line. One last comment: Before I ...   04-05-2005 01:30 am

Just checked The "Dynamic Timing" with scope on # 4 plug It is interesting it is almost Identical to being on # 1 (8-9^ BTDC) Also ...   04-05-2005 01:18 am

Sorry should have been more specific. I just finished the rebuild of the carbs. They look GREAT. The needles were a little corroded which a little ...   04-04-2005 10:00 pm

Timing perfect, (12^) Gaps point/plugs correct (0.15/0.25). Cams 110ex/110in (0^). Distrib is wired correct (1-3-4-2) Rebuilt both CD-175's.  Before the above Had lots of power (with Choke ...   04-04-2005 05:18 pm

Tim, Just finished the Delta BLK Carpet kit on my 73-JH (which orginally had very litle carpet. mostly rubber mats) It was VERY easy and ...   03-22-2005 04:53 pm

OK Lets Visit the "By the numbers" of Timing.  (73-JH without emissions no-Vac. advance) Please advise if I am Wrong Cam Sprockets: Intake 110 Exhaust 110, @ ...   03-22-2005 04:38 pm

FYI The Blue/White wire is the accesory wire (Radio) in the Ign. Switch and 5-way Ign harness plug. ( This is on my 73 JH) Rory   ...   03-22-2005 04:15 pm

Totally understood and THANK YOU !!!!!!!!!!!!!!! ...   03-14-2005 06:21 pm

Mark, Thanks for quick reply. Being in Oklahoma Emission control is a mute issue. Just want to make sure. What you are saying. I can ...   03-14-2005 11:46 am

In the final stage of 7 mo. rebuild. (73-JH #13218 49,480mile) Was able to put on road this week. it runs good with choke pulled ...   03-13-2005 09:11 pm