Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Painting Exterior only  Rate Topic 
AuthorPost
 Posted: 05-25-2005 05:56 pm
  PM Quote Reply
1st Post
Rory Clark
Member
 

Joined: 03-13-2005
Location: Okla. City, Oklahoma USA
Posts: 40
Status: 
Offline
I am considering repainting only the exterior on my 73-Orange-JH Next Fall/Winter

The whole car is in Great Shape with only minor door dings Zero Rust. The paint in the truck is in factory condition. Engine compartment has some major paint chipping but I can touch it up. The exterior paint has faded enough it just won't shine like it should.

I will repaint the exact same color and want to stay as factory as posible.  What type of paint should I instruct a paint shop to use, what questions should I ask the paint shop And what is a reasonable cost I should expect.

Any and all ideas help

Rory 73-JH

 

Back To Top PM Quote Reply  

 Posted: 05-26-2005 09:57 pm
  PM Quote Reply
2nd Post
jcrc1
Member


Joined: 05-11-2005
Location: Auburn, Maine, USA
Posts: 27
Status: 
Offline
Rory,

I recently had my 1974 JH painted. So you can compare things... My JH was given to the bodyshop as nothing but an empty shell with the front and rear suspension attached. They did a complete color change ( original  color was white) to a 2005 jaguar racing green with a clear coat. They charged me 5000.00. This included stripping the car down to metal, two coats of tinted primer were then applied with numerous body dings and dents taken car of at the same time. The bumpers needed straightening and undercoating was applied to the bottom. All the external hardware was refurbished or replaced as well as the exterior rubber seals which no doubt has aged over the years. The job took a bit over 2 months but to me it was worth it. I learned that if you are going to keep the car, a quality prep and paint job are worth every penny. Yours will be much less then mine as yours is not a color change and didn't require any bodywork. I would take a guess at 1000.00 - 1800.00 depending on the prep work involved. Enamel were used in the 70's...... I think the modern paints are much better with the clearcoat. .... But that's only my opinion

Back To Top PM Quote Reply

 Posted: 05-27-2005 02:31 pm
  PM Quote Reply
3rd Post
Sander
Member


Joined: 03-15-2005
Location: Peachtree Corners, Georgia USA
Posts: 106
Status: 
Offline
Lacquer, then enamel, then 2 stage …. the paint business is constantly evolving to better and easier to use chemicals.  The cost of materials seems to double each decade too.  The latest products are single stage, superior to base coat clear coat in many ways, allowing the ability to go back and “fill in” scratches and chips easily, when needed, and to blend in areas by simply sanding.  No need to repaint an entire door or fender.  I was exposed to the new PPG product line and was amazed how simple it was to use.  I imagine other manufacturers are out there too with similar products.  There was less “orange peel” and a much deeper reflection without having to wet sand and buff out.  This paint is very hard to chip and no yellowing like some clear coats do over time.  Ask questions when shopping paint shops for the latest and greatest stuff on the market.  Base coat clear coat … it’s yesterday’s news.

Back To Top PM Quote Reply  

 Posted: 05-31-2005 03:59 pm
  PM Quote Reply
4th Post
Rory Clark
Member
 

Joined: 03-13-2005
Location: Okla. City, Oklahoma USA
Posts: 40
Status: 
Offline
Thanks Sander,

I do not like clear coat just for the reasons you stated. There just is no easy way to touch up

Rory

 

Back To Top PM Quote Reply

Current time is 12:41 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Painting Exterior only Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems