I will have to do some more measurements to see if the 4 pistons will fit.  I'll get the biggest I can that will fit ...   05-09-2020 12:19 am

Thanks for the information.  I have been over every post here I can find for improved braking.  I got plans for the rear disc brakes ...   05-08-2020 05:55 pm

I've been looking for something better for my front brakes.  The original calipers I have are hopelessly seized and new ones are rather expensive.  Wilwood's ...   05-07-2020 06:05 pm

I rode in a late model domestic convertible the other day and the "cowl shake" was horrible.  It felt as if the whole chassis was ...   04-12-2012 03:18 pm

Thanks David and Mitch for your replies. The pictures were very helpful. Brian ...   03-19-2012 09:56 pm

Greetings I am back on my project, with the next step having to replace the rocker panels.  Does anybody have any pictures or advice, especially pictures ...   03-16-2012 11:54 pm

Thanks, Brett, for the information. Some of the bolts are rather pitted, so I am going to replace them.  I read on a bolt website that all ...   05-17-2010 01:48 am

Is there a listing somewhere for front and rear suspension bolt sizes?  I found a list that included almost all of the car except for ...   05-05-2010 02:21 pm

I'm doing a body off restoration here in The Woodlands.  I'm always up for a meeting involving LBC's and some Shiner Bock Brian Corbett ...   02-01-2008 12:53 am

I bought #15088, build date Jan 15, 1974 as a parts car, it is rusted so bad that in lifting the hood I bent it, ...   03-12-2007 12:24 am

Thanks very much for the information Brian Corbett ...   02-28-2007 01:50 pm

What are the dimensions and layout for the front and rear seat mounting crossmembers?  PO had the seat mounts made of perforated u channel riveted in place. ...   02-26-2007 01:51 am

#15813 engine #B74 04 6858 dom 2/3/74 spare engine #B73 11 4690 completely disassembled for restoration, original color red. To be midnight blue, includes Dellortos, 104/107 cams, 2.2L ...   12-04-2006 02:54 pm

Thanks for all your help.  It looks like the battery is not fully supported on the bottom. Is that correct and is it much of ...   09-24-2006 02:36 am

Can anybody point me towards pictures of the battery tray.  PO had some bastardized arrrangement that is corroded and uselesss.  This is a common theme ...   09-23-2006 01:51 am

What are the pros and cons of the bushing sets available from the club store versus the bushings available from Delta? Thanks, Brian Corbett ...   06-23-2006 01:39 am

I saw where Britishwiring.com will make harnesses for the JH.  Has anybody used them?  I haven't had the courage to ask them how much it ...   04-11-2006 08:21 pm

What were the original colors and finishes on areas such as suspension, undercarriage, inner hood, trunk and engine bay.  Were they black or body color ...   04-11-2006 02:30 am

Is it advisable to install door opening braces on the J-H when it is mounted on a rotisserie?  I had to cut a large portion ...   02-02-2006 10:39 pm

I have access to a bending brake to form new sheet metal floor and trunk pans, but what gauge metal should I use?  Some previous ...   12-23-2005 02:58 am

I saw a can of Rust Converter made by Redi Strip at the local Sears Hardware.  Has anybody used it or know if it is ...   12-03-2005 01:59 am

As a new owner of a 74 JH, just starting a extensive restoration, I wondered if anybody had any ideas on the merits of changing ...   12-01-2005 01:56 am