Brendan, I had overheating problems with 55032, There was no fan shroud. This was probably the easiest thing I have done to my car. ...   04-30-2021 03:55 am

Brendan, I'm not sure exactly what hardware you need, I'm in Australia, some of the hardware used on the J-H is common to the Holden ...   04-30-2021 03:47 am

I'm in Australia, and Delta is a little far away for me and I couldn't find other clips suitable, so I made a 25mm ...   11-02-2019 09:59 am

:) ...   08-20-2019 09:28 am

At some time she was shipped to the states, Possibly for emissions and other testing, then sat around untill she was sold to someone who ...   08-19-2019 03:24 am

That is an interesting Idea with the weed sprayer. 5 PSI isn't much and it still gets through. I suppose that pressure is perfect ...   08-12-2019 11:46 pm

When I purchased her, I didn't know she was a prototype. I had been a member of the Jensen Car Club of Australia for about ...   08-02-2019 01:27 am

Melbourne Australia VIN 1110 / 55032 (Pre production Prototype) Green (was Blue caught fire in factory re painted green in Jensen factory) Interior 2 x tone Beige ...   08-01-2019 12:06 am

Thought I'd provide an update on this thread: To mount the oil pump I made a bracket out of 3mm Mild steel and bolted it using ...   07-29-2019 04:22 am

Sorry to hear about this problem. Here's how I'd attempt a diagnosis which is not based specifically on the 907 engine; 1) When the engine is ...   07-18-2019 11:36 pm

Thank you, Tim, That is an interesting idea with the thermostat. I think the Accusump just pushes oil into one of the lines going to the ...   07-10-2019 03:52 am

Thanks Tim, good idea a small regulator wouldn't be too hard to install. ...   07-05-2019 06:36 am

Very interesting, wouldn't be too difficult to make something like that from SS Tube. Looks like 1 & 4 are ported together as are 2 ...   07-02-2019 07:52 am

G'day Miles, Something I wish I had known before I ditched the original wheel from my Jensen is that the Jensen Healey was the first ...   07-02-2019 02:00 am

Love your work ! ...   07-02-2019 01:35 am

Keen to know your thoughts ...   07-01-2019 04:15 am

And here is a supposebly better quality pump (more expensive) that can be "dead headed" with a bypass valve and pumps 10L/M at 60 PSI. https://www.scintex.com.au/products/electric-12v-24v-oil-pump?variant=864265367¤cy=AUD&gclid=EAIaIQobChMIlLnTiOqS4wIVVB2PCh2zNQLGEAQYASABEgKKl_D_BwE ...   07-01-2019 04:14 am

Here is another of the pumps (more expensive) https://www.scintex.com.au/collections/12v-pumps/products/diesel-transfer-gear-pump ...   07-01-2019 04:05 am

Here is a youtube review of the pump https://www.youtube.com/watch?v=SCeW0fFUxPQ ...   07-01-2019 04:04 am

This is one of the pumps ...   07-01-2019 03:48 am

Here is the drawing ...   07-01-2019 03:46 am

Sorry if this is covered elsewhere. I have a Jensen-Healey She sits in my garage for 90% of the year and comes out for a joyous ...   07-01-2019 03:46 am

Thanks guys I'll look at space under where the headers are ...   07-01-2019 03:42 am

Update that is a 910 engine not a 920.. ...   04-24-2019 07:13 am

Joachim, that is inspirational work. I'm interested in shoehorning a 1988 Esprit 920 engine into my Jensen-Healey. I know the oil pan is too wide for ...   04-24-2019 06:18 am

I've been toying with the merits of installing a correctly sized turbo at the rear, near the spare tyre (or in place of the ...   04-24-2019 12:31 am