| ||||
|
Posts by redracer | |
---|---|
626 posts | Showing posts 41-80 of 626 |
Electrical & Instruments > Temperature and fuel gauges not working (4 replies - 1553 views) You are correct in that both the fuel & temp gauge run off the voltage stabilizer, located high uo in the back by the 2 ... 08-05-2023 12:59 am Suspension > Lower Front Arm strengthening (7 replies - 4236 views) Some car ramps that support the wheels would allow you to slide underneath to torque the upper wishbone bolts. The rear of the car should ... 08-03-2023 01:10 am Suspension > Lower Front Arm strengthening (7 replies - 4236 views) This the FRONT of the subframe where the lower bolt for the lower arm goes through. The rear already has extra metal from the ... 08-03-2023 12:11 am Miscellaneous > Recognize this parts? (3 replies - 1191 views) Just went through the parts diagram book, and doesn't jibe with anything in there. You have another car you've been working on? ... 07-26-2023 01:35 am Projects > Darth V8Rs project (38 replies - 8040 views) Vance: I didn't look closely the first time, but I see what you're talking about upon further enlarging. The front "clip" slides into that ... 07-13-2023 07:14 pm VIN Database for Jensen Healey & Jensen GT > VIN Database / Location Jensen GT (62 replies - 56857 views) Thanks for the info; btw, I purchased the late Joe Mazurk's black GT in November, 2013.
Joseph Mazurk Jensenhealey74@aol.com 1976 Jensen GT 1611/30464 ... 06-02-2023 12:45 pm VIN Database for Jensen Healey & Jensen GT > VIN Database / Location Jensen GT (62 replies - 56857 views) Was it originally "gold" colored? The only one I had ever seen was owned by a pastor in Tennessee. ... 06-01-2023 08:56 pm VIN Database for Jensen Healey & Jensen GT > Jensen Healey & Jensen GT VIN Database (342 replies - 542590 views) Looks very nice;(and good to see a clean shop as well!) what kind of condition was it in when you got it?
take care, bruce ... 06-01-2023 08:54 pm Electrical & Instruments > Lighting (2 replies - 1060 views) yes, it's supposed to. The light is on the "constant" power(fuse #3--bottom) and the plunger that opens up when the door opens is supposed to ... 04-28-2023 01:51 am Brakes > Replacement brake lines from automec (3 replies - 1487 views) Thanks for the info. Fortunately, I some expensive tools for making as well as straightening lines in whatever metal one prefers. I have saved ... 03-24-2023 07:24 pm Fuel Stuff > Removing the fuel tank (2 replies - 1211 views) Vance:
Instead of paint, I would use POR15, MASTERCOAT, KBS, or some similar product to permanently keep the rust from attacking from the outside.
best wishes ... 03-21-2023 12:47 pm Carburetors > Fuel needles (10 replies - 10131 views) If you got your needles from Joe Curto, they should be correct: B1CM for early engines, and B1DK for the later ones.
I had Joe make ... 03-07-2023 02:49 pm Electrical & Instruments > Alternative front marker/signal lights? (6 replies - 1893 views) Vance: I've got tons of new and used J-H(ONLY) parts, likely the largest in the USA. (Don't use "fee-pay" --too expensive)
best wishes, bruce ... 03-05-2023 08:31 pm Electrical & Instruments > Removal of wiring harness (7 replies - 2166 views) Vance: I have plenty of good old used harnesses, mostly middle style and a few of the later ones. Please email me photos of what ... 02-26-2023 09:21 pm Electrical & Instruments > Removal of wiring harness (7 replies - 2166 views) Art is correct; you push the part in the engine bay into the interior(yes, you need to remove the metal plate for the fuse box). ... 02-26-2023 01:14 pm Ignition > replacement keyed ignition switch (11 replies - 18872 views) Yes; the original ignition key did come with the black plastic on it(but not the other key which does the trunk, glove box and doors).
There ... 02-24-2023 04:36 pm Ignition > replacement keyed ignition switch (11 replies - 18872 views) This is somewhat strange. as today I also received a request from VANCE for a the lock!!
Brett is correct if only the key part is ... 02-23-2023 09:04 pm Engine & Transmission > clutch fork (6 replies - 2365 views) Hey gang: just looked at my stock and they are the same. The main diff is the fulcrum stud for the 2 different bell ... 02-22-2023 04:44 pm Fuel Stuff > Fuel Tank (2 replies - 1146 views) azvat: the later tanks had 3 nozzles coming out where the pressure relief valve is. The one on the back side(i.e. nearest the ... 02-15-2023 06:13 pm Body & interior stuff > Martin Robey Sheet metal (2 replies - 1199 views) I believe Robey bought all the metal forming tooling(KIRKSITE) that Jensen had. However, the outer skin for the hood/bonnet was gone, but I believe ... 02-07-2023 06:48 pm Fuel Stuff > ALUMINUM GAS TANK FEROM EBAY (10 replies - 3253 views) Sander's fix with POR15 has been the "standard" for a long time, but some tanks(2 recently) have been "worked/fixed" by another method so they are ... 02-04-2023 03:05 pm Fuel Stuff > ALUMINUM GAS TANK FEROM EBAY (10 replies - 3253 views) 3rd pic---proper sending unit ... 01-29-2023 06:39 pm Fuel Stuff > ALUMINUM GAS TANK FEROM EBAY (10 replies - 3253 views) 2nd pic ... 01-29-2023 06:39 pm Fuel Stuff > ALUMINUM GAS TANK FEROM EBAY (10 replies - 3253 views) Notice the 2nd pic where the positive lead for the sending unit is. A double layer of old bicycle tubing as well as a 3/8" ... 01-29-2023 06:38 pm Body & interior stuff > Replacement floor mats (2 replies - 27797 views) Lloyd Floor Mats makes some very nice ones. I had some "tan" ones with red insignia made for mine.
https://www.lloydmatsstore.com/?ar_clx=yes&ar_campaign=1493206238&ar_ad=492883016632&ar_adgroup=63133021652&ar_channel=google&gclid=Cj0KCQiAtvSdBhD0ARIsAPf8oNnUnpLIwZDmZyfXvTSNyCQWIKLBBj5XIJr8SxvzRxW8WQ4Hhiz_GfwaAhD3EALw_wcB ... 01-10-2023 05:43 pm Fuel Stuff > ALUMINUM GAS TANK FEROM EBAY (10 replies - 3253 views) Recently, I had an aluminum gas tank from ebay delivered to replace a client's rusted out one. The construction looks good(haven't tested it for ... 01-07-2023 08:16 pm Engine & Transmission > Need to change out the Timing Belt Tensioner (23 replies - 36121 views) Mark, from a previous thread, found this(I bought one as well for a back-up). The size is 38mm
http://www.jensenhealey.com/forums/view_topic.php?id=2748&forum_id=2&highlight=tensioner+wrench
AMAZON:
https://www.amazon.com/dp/B07G2CW7N7?ref=ppx_pop_mob_ap_share ... 10-11-2022 12:52 pm Miscellaneous > Rack and Pinion (11 replies - 3438 views) Sorry--forgot to mention the original bushing has leather for the bearing surface. DELTA sells VERY nice neoprene ones and include silicone paste which ... 09-28-2022 12:30 pm Miscellaneous > Rack and Pinion (11 replies - 3438 views) You need to remove the steering wheel, then the 4 cross point screws(#2) holding the aluminum bearing.
Then loosen the upper steering shaft U-joint(just in front ... 09-28-2022 01:16 am Miscellaneous > Rack and Pinion (11 replies - 3438 views) The standard test for determining play in the shaft is to LIGHTLY move the steering wheel(maybe by a friend of your arm isn't long enough) ... 09-28-2022 12:24 am Miscellaneous > Rack and Pinion (11 replies - 3438 views) Nothing to really "surprise" you, but yes there is a spring that pushes down on the special machines metal part that engages the pinion shaft. ... 09-26-2022 06:27 pm Miscellaneous > Rack and Pinion (11 replies - 3438 views) The top cover(2 1/4" bolts) has shim(s) under it to force/push the pinion gear down onto the rack. This is also where you would add ... 09-26-2022 03:07 pm Miscellaneous > Rack and Pinion (11 replies - 3438 views) Shims were used for the adjustment. If you pull off the top cover, you will probably have one or two shims under it. Suggest adding ... 09-25-2022 03:35 pm Engine & Transmission > Oil pan gasket or seal replacement (10 replies - 5398 views) jomac: years ago I made a support for the engine block for exactly the same purpose, rebuilding the front suspension. I used wood(2'X4"s ... 09-25-2022 03:33 pm Ignition > Ignition Switch (7 replies - 3188 views) browndog: that male spade connector that is on a rivet, has nothing to do with starting the engine.
I assume(because this was done on almost ... 09-21-2022 03:13 pm Ignition > Ignition Switch (7 replies - 3188 views) browndog; glad you solved your problem, but I am very curious as to what exactly you found out?
I'm familiar with the logic box problem and ... 09-21-2022 02:19 pm Miscellaneous > WARNING! Scam Seller (4 replies - 2369 views) Not a bad idea to post it just in case.
When he refuses an inspection from someone close by, that would surely be a ... 09-08-2022 09:16 pm Miscellaneous > WARNING! Scam Seller (4 replies - 2369 views) Just curious; what did this person say/show/do that made you suspicious? ... 09-08-2022 06:39 pm Suspension > steering u joint (1 reply - 1695 views) I thought the lower one(that attaches to the rack& pinion shaft) was available through DELTA and maybe some other sources? I know there are different ... 09-02-2022 08:10 pm Engine & Transmission > Belt tensioner bearings (2 replies - 1715 views) Smart man, noomg!.
Unfortunately, one would HOPE the cheaper parts would be of good quality, but as you, I, and many ... 09-02-2022 07:58 pm | |
Current time is 03:29 am | 1 2 3 4 5 6 7 ... |