Great work! I have been looking into possible brake upgrade solutions also and have some prototypes for front and rear brakes using Honda/Acura calipers with various ...   03-29-2017 01:42 am

Hi Rick, If you want to stay with the stock speedo you have two options that I can think of: 1) Try to find the next closest ...   02-10-2017 02:14 pm

The only commercially available fuel injection system I have seen is one from Lotusbits.com which uses Jenvey throttle bodies: http://lotusbits.com/upgrades_fuel_injection.html Since one of the fuse descriptions states ...   10-20-2016 10:06 pm

It looks like it is a 1/4"-28.  I just ran a tap that size through the bolt hole in my '75 axle. I am not sure ...   02-15-2016 10:03 pm

The last repair shop I used was "Scotland Yard" in Denver but I think they have been out of business for years. I have never used ...   12-23-2015 09:26 pm

Hi Nigel, It has been a while since I looked into the part numbers but they should all fit the W58, at least the ones that ...   10-06-2015 02:47 pm

Hi Nigel, I am looking into a W58 conversion as well. I have replaced the speedo gears (one in the transmission tail housing and one on ...   10-05-2015 09:31 pm

Some of the 907 emission heads had eight air injection ports on the exhaust side where the air injection rail was attached. The GT 907 ...   09-14-2015 08:12 pm

StevenD57 wrote: t4brew wrote:I had the same reaction to that system.  So far I have acquired the ECM, chip, harness, throttle body, fuel rail, ...   11-03-2011 12:48 am

StevenD57 wrote: t4brew wrote: Jenvey has a set of DCOE throttle bodies: http://www.jenvey.co.uk/home/twin-throttle-bodies/twin-bodies-dcoe-style-118mm-long/jenvey-dynamics/tb-body-40-50mm-pair-tbpxxi http://www.jenvey.co.uk/components/com_virtuemart/shop_image/product/tbp45_v1.jpg Lotusbits sells a kit that includes the Jenvey throttle bodies and engine management system: http://www.lotusbits.com/upgrades_fuel_injection.htm file:///tmp/moz-screenshot.png http://www.lotusbits.com/images/excel_fuel_injection.jpg file:///tmp/moz-screenshot-1.png I ...   11-03-2011 12:13 am

Hi Joachim, Sorry, I had not realized that you were looking for a throttle body without a visible fuel rail. Interesting idea to mount the injectors to ...   11-02-2011 11:09 pm

Jenvey has a set of DCOE throttle bodies: http://www.jenvey.co.uk/home/twin-throttle-bodies/twin-bodies-dcoe-style-118mm-long/jenvey-dynamics/tb-body-40-50mm-pair-tbpxxi http://www.jenvey.co.uk/components/com_virtuemart/shop_image/product/tbp45_v1.jpg Lotusbits sells a kit that includes the Jenvey throttle bodies and engine management system: http://www.lotusbits.com/upgrades_fuel_injection.htm file:///tmp/moz-screenshot.png http://www.lotusbits.com/images/excel_fuel_injection.jpg file:///tmp/moz-screenshot-1.png I am looking into using ...   11-02-2011 09:16 pm