I had to try this also.  Unfortunately, I did not have a perfect open spot since this is the Friday before Christmas weekend, and it's not ...   12-22-2006 11:17 pm

Mine is a 1974 MK II (4-speed). Vin #1140 - 14011 (RHD, imported from the UK to the US in 2005).  Engine #A73 08 3836 (Original) Engine #B74 ...   11-28-2006 04:00 am

An update for those of you that provided me your input, and anyone else curious...the clutch is done and fixed.  As I mentioned before, the ...   08-15-2006 02:02 pm

Good info.  I can live with that happening.  Had it been installed wrong, I'd be a little more ready to place some blame.  If it's ...   08-09-2006 05:00 pm

Thanks for the reply, Greg!  Here's an update for you and anyone else on the board who might have some ideas.... The tranny is down; the ...   08-09-2006 12:48 am

Hi folks, I quickly searched the board for this topic, and didn't see it.  Hope that I'm not duplicating any previous post.  Here's my issue, and ...   08-03-2006 08:56 pm

Steve, It's not that tough to get your hands on the points, condensor, distributor lead, rotor, and cap.  You might even be able to get it ...   06-24-2006 07:39 pm

Brian, I second Greg's information here.  I just put a full set of Super Pro's throughout the front end of mine.  I combined these with new 205/60 ...   06-24-2006 07:03 pm

Hey Guys, First, thanks again to all of you that took the time out of your day to help out a fellow Jensen owner.  I’m grateful ...   06-16-2006 04:53 pm

Hey Guys, I see plenty of problems described on the board around the ignition/distributor, but none that quite fit these symptoms.  Before I subject myself to ...   06-15-2006 05:08 am

Jim, Just had my rotors turned last week.  Before going in to get them done, Delta advised that the minimum thickness should be .343.  I had my ...   05-27-2006 10:22 pm

I just had an extensive rebuild of my engine completed by Viking Motorsports - Costa Mesa, CA.  The owner, Harry Appleby specialized in all things ...   05-20-2006 01:51 pm

John, I recently imported a Jensen Healey into Southern California from London, England.  The entire thing was handled by Dependable Auto Shippers, including the local delivery ...   01-05-2006 08:38 pm

Somewhat unfortunately, my first JH endured tons of cold-weather starts, as it was my daily driver back in Kansas for several years.  Even when it ...   12-14-2005 02:31 pm