Sorry I actually got the outer wipes. ...   08-10-2007 10:47 am

I bought outers from Delta and they are 1/8" too narrow to touch the window. Since I live near MacGregor's in Dundas I dropped by ...   08-10-2007 01:36 am

You could try calling Martin at the following web site. I picked up some trim pieces from him the other day and he may have ...   08-10-2007 01:31 am

I've just finished installing a new clutch cable and got down to the last step of connecting to the clutch lever. The cable seemed to ...   08-10-2007 01:26 am

I think I have resolved the problem. The cap on the top of the Unisyn does not have a proper seal so there is a ...   08-01-2007 10:55 pm

The pipe is not blocked and the float does move. The carbs are Strombergs and as much as my son would like the Dellortos we're going ...   08-01-2007 09:47 pm

I bought a Uni-Syn balancer to synchronize the carbs and followed the instructions included. I've not been able to get a reading with the unit unless ...   08-01-2007 12:50 am

JH 11472 acquired last year from owner of 31 years. Unfortunately had not been run in about 4 years. Lots of work and back on the ...   08-01-2007 12:35 am

I also had a wheel bolt strip just before the safety check. Apparently Delta does not have any so after a bit of a search ...   08-01-2007 12:27 am

This is fairly late in this string but I found replacement lug nuts at the auto parts store. The rims are probably not originals but ...   08-01-2007 12:18 am

This is fairly late in this string but I found replacement lug nuts at the auto parts store. The rims are probably not originals but ...   08-01-2007 12:17 am