John, What you're describing is a common problem. I've got to do the same thing with my blue Jensen Healey when I work on it. Jim ...   07-15-2009 02:57 pm

Steve and I just did the same thing on his JH 4-speed. The trick is to get the snap ring started and use a coulpe small ...   07-02-2009 01:42 am

Jeff can build it out to whatever specs you give him. ...   06-29-2009 02:20 pm

I'd shoot him an email. Jeff's a really nice guy. ...   06-26-2009 05:51 pm

This is the kit I'm referring to: http://advanceddistributors.mybisi.com/product/84778/45D-Supreme-Ignition-Package_377053.html It's more than just the Pertronics. It's a new coil, wires, etc, etc. ...   06-26-2009 05:25 pm

Kuleinc,   If you're going to go the Pertronics route I *highly* recommend contacting Jeff at Advance distributor. He sells a really nice kit for ~$300 that ...   06-26-2009 05:12 pm

You're in luck, I just happen to have the console assembly sitting in front of me. The switch in question has four tabs that you ...   06-25-2009 02:47 am

Motor mounts are on diagram 549 (page A26) of the parts catalog (plate refs 27 - 33) Suspension mount point is on diagram 501 (page E2) ...   06-12-2009 06:04 pm

Hey Mitch, Was that guy an enthusiast or a company? I've been trying to find a Getrag parts catalog so that I can cross reference the ...   06-11-2009 08:29 pm

Ok, before I go too far, I want to point out that Big Amps != Good sound. I see way too many cars around here ...   05-22-2009 06:46 am

Jim,   Thanks for the information. I went spelunking through my array of spare JH bits and found an old line with the Check valve in place. ...   05-07-2009 05:06 pm

Jim,   Do you have any idea of a part number for the check valve? It's not noted in any of the Jensen-Healey reading materials I have ...   04-24-2009 04:05 pm

Take a look at the following: http://www.theymightberacing.com/Projects/FrameOff/JH74G/FuelSystem.aspx I have a Jorge tank and have tested it it pressure wise. I put the tubing in as was ...   04-23-2009 04:04 am

Dunno if anyone sells brake lines for the JH. They're pretty simple to fabricate though. I'd check with Delta first, if not Martin Robey. I doubt ...   04-20-2009 05:18 am

My normal route for finding bits is:   1) Delta 2) JHPS 3) Martin Robey 4) Scour the Internet (I go to Delta first because the shop is a 20 minute ...   04-10-2009 04:01 pm

I checked my lock parts bag, I don't have one.   Good luck! ...   04-10-2009 02:52 pm

You check with Martin Robey? http://www.martinrobey.com/   Jody ...   04-10-2009 02:50 pm