I would start with the articles listed here: http://theymightberacing.com/Projects/FrameOff/JH74G/Literature.aspx Most of these documents were written/compiled by Tim Engel who is insanely knowledgeable about the lotus motors. ...   12-12-2011 08:55 pm

Hey Frank, If you have longer material that won't fit on the forums you know I'm always happy to host the info on my web site. Jody ...   12-05-2011 07:45 pm

You may want to hit up Jim @ Delta. He distributes the VTO wheels and often has very good prices on them. ...   12-05-2011 03:51 pm

High Beams iirc ...   12-05-2011 03:49 pm

The stuff I use is called "Seal All" comes in a yellow tube. Should be available most anywhere, works really well. ...   12-04-2011 04:12 pm

Chris, Can I get a copy as well? Thanks! Jody ...   11-25-2011 06:58 am

Keep in mind that the JH front cross member and the GT one are different (Art and I discovered this when disassembling his GT). ...   11-20-2011 01:41 pm

I believe that you can disassemble the unit and remove the old seat belt fabric. Any industrial fabric shop should carry it. ...   11-19-2011 02:46 pm

There was a "factory" A/C but it was dealer installed. I have a bunch of one that I got from Dale a while back. I ...   11-18-2011 06:59 pm

Whereabouts are you located? And if you're going to put an engine like that in make sure you find a good diff to support it. You ...   11-18-2011 06:56 am

Nuts and bolts are easy to source. I spent a couple weeks trying to source the teflon bushes but didn't have any luck. ...   11-15-2011 01:44 pm

Andy, Thanks for the kind words. I know that others would likely appreciate a quick description on how to get the heater out of the car ...   11-07-2011 01:05 am

www.britishwiring.com ...   11-06-2011 01:50 pm

Bummer on the steering knuckle.   Good for the driving though! I love the feeling in the car when something's been improved. ...   10-01-2011 01:10 pm

Steve's JH had the same problem as Ron's ...   10-01-2011 12:37 am

I know James from AH circles. It certainly helps to have Martin Shirley nearby. :) ...   09-24-2011 03:23 pm

If you prefer a vendor to ebay contact Ted at TSI. http://www.tsimportedautomotive.com/gearreductionstarters.html ...   09-24-2011 03:09 pm

Before you yank you the starter make sure you're getting good current/amperage at the starter. Clean all the wiring connections including the engine ground. If that ...   09-22-2011 04:52 am

ok. I watched the video. That doesn't look right to me. I'm afraid I'm in the middle of my TR8 at the moment (literally) so ...   09-19-2011 06:08 am

Mason,   Have someone sit in the car and turn the steering wheel while you watch the upper knuckle. It's very common for that to hit the ...   09-19-2011 02:45 am

Mason, Your center console has been modified. That is not an original piece. The badge is a steering wheel badge. My memory is a little on the ...   08-21-2011 05:39 pm

You need to check the engine # on the 74. If the number is below 2500 (give or take) they are identical, otherwise it's a ...   08-10-2011 06:30 am

I used to buy the cheapo covers. Recently bit the bullet and bought one of the top of the line ones from Jim @ Delta. Fits ...   08-09-2011 03:42 pm

Carl, If you are looking for technology beyond the norm in JH circles I would highly recommend checking out what the Lotus folks are doing. The ...   07-05-2011 04:19 pm

Oh please don"t use that stuf. Bought a car that had that used in it. Had to toss the entire cooling system. If it's leaking bite the ...   06-23-2011 03:00 pm

Just to make sure you know. The premade box is the body. It doesn't contain the front woodgrain piece, the lock, or the NLA rubber ...   06-22-2011 01:16 am

You canbuy one ready made from Delta. It's not worth the hassle trying to make it. ...   06-22-2011 01:11 am

If you want a better picture look at the bottom of this web page: http://www.theymightberacing.com/AzJensens/WheelsOfBritain2011.aspx He showed his car in the Masters class at Wheels of ...   06-20-2011 05:36 pm

I don't know what your budget is but if you want a really sharp JH for a heck of a price you need to consider ...   06-20-2011 04:06 pm

Ramp, One other item we're working with here is cost. I have priced the original lotus EFI systems, and they are extremely pricey. Jody ...   06-20-2011 05:22 am

First i would double check that it's not the clutch cable that's causing some of the issues. I.E. If the clutch isn't completely disengaging it ...   06-17-2011 02:20 pm

Steve, Give it a freaking rest already. They are not the same, and your selective comparisons and freak out statements are starting to really wear thin. ...   06-12-2011 03:46 pm

Malcolm, I've seen pictures of those lsd diffs, but never in person. I don't think very many of them made it over to the US. Frank, I know ...   06-12-2011 02:23 pm

Paul, I think that's a great list! Based on what i see there you should add some decent pep to the engine while keeping it as an ...   06-12-2011 02:21 pm

Here's the scoop on carburetors. The Jensen Healey was fitted with DHLA40's with 32mm chokes. Lotus OEM Dellortos for the 907 are DHLA45E's with 35,  36,  ...   05-31-2011 09:18 am

It's easy enough to go with the 45's instead of the 40's and you can always jet them down if need be. With carbs, providing ...   05-30-2011 02:21 pm

Joachim, Thanks for the correction. In my brain the number of the cam should go higher as it gets more aggressive, I always reverse the #s. ...   05-30-2011 02:13 pm

How much is "a little"? And what colour is it? purple = dot5, dirty/brown = old fluid. ...   05-30-2011 01:45 pm

Cort, There was some discussion a while back about getting some of these made. The Jensen Healey version of the rubber bit is slightly different from ...   05-27-2011 02:13 pm

ok, let's dive in then. A good source of info is this article: http://www.jensenhealey.com/html/eng.html This assumes you're starting with a truly stock US equipped car and ...   05-26-2011 08:06 am