Been looking there myself. Thanks, jim ...   08-08-2011 03:03 pm

Can anyone recommend a car cover for the JH. It does not have to be top of the line as the car is garaged. Just ...   08-05-2011 04:19 pm

Any decent upholstery shop should be able to do it. Had mine done and came out great. Jim ...   06-25-2007 02:39 pm

Well, I just changed to a fail safe thermostat two weeks ago. Thought it would be a good idea. After reading what was posted, should ...   05-18-2007 03:54 am

I was going to use a fuel additive such as Berryman B12. Are there any pro's or con's to using such additives once in a ...   04-30-2007 04:21 pm

Colin: If you have a Delta catalog it appears to be the Trim-door waist -LH and RH. Parts 92376 and 92375. Does this help? Thanks Jim     ...   03-20-2007 05:04 pm

I am re-doing the door panels and am in need of the top trim that covers the edge of the panel. I was able to ...   03-20-2007 03:31 pm

If an anti-seez compound is used what should the lug nut torque be? I see that if dry, 51 lbs is recommended. Thanks Jim ...   01-25-2007 02:52 pm

YEAR 1973, VIN 10646 VERY GOOD RUNNING CONDITION. 75,000 MILES. LOCATED IN LODI CALIFORNIA. BODY AND INTERIOR ALSO IN VERY GOOD CONDITION. ENGINE B72121041 FROM VIN 10906. ...   12-09-2006 04:35 pm

Thanks for the advice. The seepage seems to be coming from the top bolts on the auxiliary housing. Will the hylomar work for this application and ...   12-09-2006 04:28 pm

I have some minor seepage of oil coming through some bolts. I have tried tightening but it has not stopped. Is there something I can ...   12-07-2006 03:01 pm

Thanks for the tip. Makes sense. Jim ...   11-29-2006 02:58 pm

Judson, Thank you for the reply. If I remember correctly, I am able to start the car without the seat belts being connected. I will confirm ...   11-27-2006 05:12 pm

I am planning to replace the seat belts in my car. As I am no electrical expert I would like to know if I cut ...   11-27-2006 02:32 pm

I have purchsed a headlight, hazard, and fan switches from Delta. They work and fit fine. No problem. Jim ...   09-20-2006 08:38 pm

Thank you Mark. I will start with your list Jim ...   08-29-2006 09:35 pm

WHEN DRIVING WITH THE LIGHTS ON THE VOLT GAUGE WILL BEGIN SHOWING 12-13 VOLTS. AFTER A BIT THE NEEDLE SLOWLY DROPS TO THE RED AND ...   08-29-2006 12:17 am

I have purchased and received the dash kit from Madera Concepts. Everything looks pretty straight forward except the installation of the piece to the left ...   07-25-2006 02:55 pm

Thanks to all for your help. Kurt, have you tried the material from the "insulation4less" site? In particular the Prodex which is the foil-foam-foil material. It looks ...   06-22-2006 10:47 pm

I have heard a lot of good things regarding Dynamat and Dynaliner. Is it necessary to use Dynamat under Dynaliner if I am more concerned ...   06-21-2006 11:49 pm

I am contemplating purchasing a wood dash replacement from Madera Concepts. I am sure someone has used them out there. Is the quality as good ...   04-07-2006 07:53 pm

Let us know how you like them when they arrive. They look great Jim 10646 ...   04-07-2006 06:39 pm

Tom: Thanks for the info. I will certainly watch out for the "sticky out" things. Thanks also for your offer. The pot would need to be ...   04-04-2006 05:17 pm

I have come upon a pair of "J" badges and would like to know if there is some reasonable guideline as to the placement of ...   04-03-2006 03:02 pm

I would be if the price was right. ...   03-13-2006 07:56 pm