A quote I just read that applies here: "It is only a 15 minute job that takes 40 of practice." ...   06-12-2013 02:16 pm

Red dot is visual reference of a post you made a comment in. Makes it easier to find and reference items you provided input ...   05-16-2013 11:24 am

Jealous Congrats on the swap and hoping you get many purring along miles out of it. ...   04-24-2013 11:20 am

Try this place: http://www.kiderubber.com/pc-1.html Buy U Channel of the appropriate size, cut it to length, and install it where the ends come together at the top with ...   04-22-2013 09:03 pm

I have some that were mounted by the PO. They are at least 5 years old as that is how long I have owned ...   03-21-2013 12:18 pm

I have lost count of the gaskets I have made by tracing with a sharp pencil onto a Cheerio's box and cutting out same with ...   03-06-2013 02:39 pm

Definately interested in the T9 converstion.  Thanks for taking the time and interest in doing  this. ...   03-04-2013 12:08 pm

Not to leave you gentlemen hanging, but I am trying to figure out the economics of purchasing the hardtops you have offered. As both ...   02-08-2013 11:36 am

PM answered ...   02-04-2013 01:31 am

With Oklahoma City as a reference point to start looking, I am wanting a hard top for my car in a bad sort of way.  ...   02-03-2013 12:53 am

Buy a GM single wire, bend up a bracket, and never look back. ...   07-02-2012 06:13 pm

Does it happen when the tank is full or does it matter? I found a hose clamp that had pulled through the fill tube ...   06-14-2012 07:16 pm

Here is the test: Flip the switch. If something happens it is an add on. If nothing happens and it appears broken then ...   05-17-2012 01:26 am

I have owned three now and never seen a toggle switch. This is true for 74 and earlier only as that is all I have ...   05-14-2012 09:07 pm

Jody, While looking if you stumble across a mythical Zeus head pack it up for me. I'll send my address when you are ready. ...   04-30-2012 05:14 pm

Actually the "Lotus" 5 speed is a "BMW" 5 speed and a "Toyota" 5 speed is the "preferred" 5 speed. I hope this cleared things up ...   04-23-2012 05:43 pm

...or he could supply a parts listing that you would collect and mail to him. Then he would Tig them up and there would ...   04-04-2012 03:23 am

I have an "agreed upon" value policy on the JH right now of $7000.00. That is what I get if it is all on me. Now, ...   03-25-2012 10:28 pm

Just wanting to resurect one of the threads I enjoyed.   Any new adventures? ...   03-13-2012 12:22 pm

I thought along these same lines as far as just having a front opening hood. I have even went as far as obtaining a ...   02-09-2012 12:22 pm

I have been looking for four years now for a US sourced 912. With the added statement that this has not been a full ...   02-05-2012 09:16 pm

Does anyone have the relay diagram for a repost?  The posted link does not seem to be active any longer. ...   01-30-2012 04:56 pm

One thing I discovered was that the links to the Club Store and the picture gallery are no longer at the top of the page.  ...   12-20-2011 10:43 pm

I can make those work easily. Thanks for that. ...   11-17-2011 07:18 pm

Thanks Jody, that is the hangup with me as well.  Everything else I can fake, fudge, or force. ...   11-15-2011 06:50 pm

Any clue on what to do for convertible top hardware?  Was wanting to redo all the bolts, nuts, and teflon bushings. ...   11-15-2011 01:26 am

http://hotrodwires.com/ ...   11-13-2011 05:26 pm

I want one of those with a vengance, yet Oklahoma is so far away from you.  Guess I'll keep looking. ...   09-13-2011 06:32 pm

Nice to see that this is bass ackwards from what I have found. Well, I was looking at aftermarket gauges some day.  Maybe that day is ...   08-15-2011 11:58 am

What is the range of the stock sending unit? I am considering installing an aftermarket fuel cel that has a sender that is 0 ohms empty ...   08-11-2011 06:22 pm

Explosives!   Works every time. ...   07-21-2011 07:34 pm

While in the Navy I used to watch the divers remove and install propellors on the subs.  They would have a crane lower a very ...   07-20-2011 12:16 pm

Another thing to consider.  You can purchase a 912 High Compression engine from Lotus Bits in the UK for $2600.00.  You would have shipping on ...   05-26-2011 10:31 pm

The real question is "how deep are your pockets?" 2.2 litre stroker, up the compression, new header and exhaust, and a big brake kit for the ...   05-25-2011 07:27 pm

My current JH has front and rear bars installed w/SPAX shocks all around set to a very firm ride.  It corners very flat with hardly ...   04-08-2011 11:51 am

I had to use a "screw knocker". It is a impact head with a handle on it that accepts a phillips (or any other) bit.  You ...   04-04-2011 12:12 pm

On a previous Jensen (can't seem to do without having at least one) I had a very noticiable vibration start in the drivetrain.  By the ...   02-14-2011 12:22 pm

Watch out for how "tall" the wiper arms will sit after installing new blades.  Many will cause the arms to rub on the underside of ...   01-28-2011 03:06 pm

I got mine out by touching it with a screwdriver.  It immediately broke into three pieces and was easy to remove. ...   12-30-2010 11:55 am

Regarding shipping to the states, it is pricey.  I would love to find a way to have items from Lotus Bits dropped off at the ...   11-09-2009 12:24 pm