Problem Solved. I mounted the distributor and the oil pressure came immediately. So now I learned it - No distributor-> no oil pressure :-( I will go and ...   06-04-2014 04:55 pm

Rebuilding my engine i mount what is supposed to be a freshly rebuild oil pump. When mounted I decided to spin it using my cordless drill. I ...   06-04-2014 02:34 pm

Hi Guys, I am about to mount my new oil pan to my 2.2 907 engine. The oil pan is a lotus one modified to fit a ...   06-03-2014 02:44 pm

I only bought 2 pcs , and I think they were around 15 GBP each plus PP You can see the prices on his homage ...   05-23-2014 07:20 am

got them from Lotusbits in the UK. Br Kim ...   05-23-2014 04:24 am

Hi Just replaced my cam pulleys. As you can see the belt now moved towards the engine and is flush with the rear of the pulleys. Is ...   05-22-2014 07:28 pm

Hi John, Mine is 79300 miles. I do not know the service history as it is a US import . br Kim ...   05-18-2014 07:17 am

Hi Tom, I really ran it hard and for at least 1 and a half hour, and it definitely ran colder. For the temp measurement i mounted ...   05-18-2014 07:04 am

Hi Guys, Thanks a lot for the input. I did put a thermostat in the car today and a test-drive immidetely showed that the temperature had dropped ...   05-17-2014 08:43 am

Hi I agree with Kurt. Loosing an Engine would be a shame. I´ve got a set Of E-cam Sprockets which are MOP 107. will they work with ...   04-27-2014 03:42 pm

It seems that my JH ( bought last summer ) gives me more and more issues to solve. Today We had a hot day ( At ...   04-26-2014 04:21 pm

Hi I noticed that my Cam Shaft wheels looks like they have been worn down. Unfortunately I did not notice wheter they looked like this when ...   04-26-2014 03:37 pm

Hi Kurt, That makes sense:-). My problem is that I have two set of Pulleys, and I want to find out which they are. Trying to measure ...   04-12-2014 07:13 am

sorry I meant at which valve clearance is the normal opening and closing figures of the valves given? Best regards Kim ...   04-11-2014 06:04 pm

hi anyone who knows the normal opening and closing figures are given?? br Kim ...   04-11-2014 06:03 pm

hi Just tested my timing and it lucks like my cams are app 252 deg with valve clearance of 0.2 mm. Inlet opens 14 deg BTDC ...   04-06-2014 02:37 pm

Hi, Just did some more measuring I measure the lift of the cams to be 9 mm app 0,359". The camshafts have no stampings but they have 2 ...   04-04-2014 04:02 pm

Hi Again, I think that I am getting closer to be a little wiser:-) Looking through the answer from "Subwoofer" I conclude the following: Inlet cam: MOP ...   04-03-2014 06:02 pm

Hi Just a follow up. I cleaned all the oil away from the sealing surfaces, (did not think about he bolt holes) Anyway I spot glued ...   01-30-2014 10:40 am

Hi, I have been reading a lot of the topics concerning the cam timing, and there is a lot of valueble information on weather to go ...   01-29-2014 04:51 pm

hi guys, Thanks a lot, I have cleaned it up and degreased gaskets and sealing surfaces. I will try to spot glue them to the cover and ...   12-23-2013 01:34 pm

Hi, I have just checked my valve clearances , it was all good :-) However putting the rocker covers back on the engine and getting the gaskets ...   12-23-2013 10:53 am

Roland11a , Thanks a lot for the photos, I will go ahead and use my stand. Got a 2.2 engine I need to work on:-) ...   11-28-2013 06:31 pm

Thanks a lot guys, Roland11a if you can post an image it would be helpful. I guess that I have to stay away from the threads for ...   11-27-2013 04:25 am

Hi, I have bought an engine stand as shown on the attached photo. The engine have to be fixed by 4 bolt using the threads where the ...   11-26-2013 06:33 pm

HI Kurt, Thanks a lot. For the 2 .0 I will properly as you say fit the Dellortoes. I do not know which car they come from. ...   11-21-2013 04:50 am

Hi, This summer I bought my first JH. it is a black 1974 model with a 2.0 lotus 907. just a few weeks ago I found a ...   11-20-2013 03:52 pm