Thanks Greg, I am so grateful! I was about to try the impact orange. I am going to talk to my paint guy with this info ...   06-19-2011 11:35 pm

Thank for the explanation I get it. ...   05-31-2011 02:33 am

When I look at the front sway bar it makes a lot of sense; there is a lot of physics in every front suspension component ...   05-31-2011 12:06 am

What does the rear Sway bar do? I mean the rear suspention is not independent and there can't be much sway or roll with the ...   05-30-2011 02:32 pm

I am still looking. I will paint the car in a month or so If I have to use a computer match, I f ...   02-18-2011 04:16 am

I really want to use the right color. I got the Ditzler code but I need it in PPG or Dupont ...   12-13-2010 04:31 pm

Really? Replace it from underneath? I will give it a try this weekend. Thanks Brett ...   12-02-2010 06:02 pm

Thanks Dan, I talked to Jim at Delta and I did a preliminary inspection. The clutch release lever is defiantly loose and moving around seems to ...   12-02-2010 02:55 pm

Thanks Joachim, I will be disassembling it this weekend ...   12-01-2010 09:02 pm

No snap or clunk just stopped working. I haven't had time to inspect the car. Just had to tow her for the first time. ...   12-01-2010 04:01 pm

correct me if I am wrong; Grease the pinion oil the rack ...   11-24-2010 01:38 am

Thanks Francis, I may use that code. My paint guy has a color analyzer that could help. There is some paint under the license plate that ...   11-15-2010 09:43 pm

Hi Francis, Did you ever get the paint code for Tang. Orange? 19631 was originally orange and i want to paint it the ...   11-15-2010 08:57 pm

It is just called "Comp. Cam break in oil" I got it at my local Speed shop "Winchester Auto" Unreal my oil pressure is better ...   11-06-2010 10:47 pm

The problem of low oil pressure at idle began with an oil change. That should have clued me in that I removed something the engine ...   11-06-2010 04:40 pm

OK I added "Competition Cam lubricant and break in oil" It has zinc and it has made a huge difference! My cams and valve train ...   11-06-2010 04:21 pm

Hey lets face it the JH is the most under appreciated car in history. They are very fast they handle great they have great historic ...   11-05-2010 01:52 am

Thanks, For now I am just going to drive and enjoy! As long as it pulls this strong I know i can do better but just ...   11-05-2010 12:28 am

OOPS! I just am trying an off the shelf cam lubricant. The engine sounds a tiny bit better but loss of oil pressure at low ...   11-04-2010 09:33 pm

Hi Kurt, Thanks for the info. What is a good quality additive you would recommend for the 907? ...   11-04-2010 04:40 am

Thanks Kurt, I may try another oil. The shop I go to out here is the local Ferrari shop (the only guys who will get near ...   11-03-2010 07:26 pm

Thanks Greg, I hope I do not have to tear down my engine to do the mains. Some kind of pro shop must have built the ...   11-02-2010 10:04 pm

Thanx, I use 20-50w GTX Is there anything better? ...   11-01-2010 08:18 pm

!8837 will start fine then run great 50-65 lb. oil pressure. Then when I get off the freeway oil pressure dives to like 10 lb. ...   11-01-2010 06:46 pm

Santa Cruz is Nice! I would love to see you your car whenever you can make it out here. Hey I have been driving 8837 ...   10-28-2010 01:18 am

Hi Kurt, I do not know if these particular wheels where a factory option. They say "Zenith Wire Wheel Company Campbell California". The do look cool ...   10-27-2010 11:38 pm

Hi Lash, Yes i am Hooked. I just sort of liked it at first but now that it is running better i really love it. ...   10-21-2010 07:59 pm

So I got this Tax return and I am going to by a Camery or Acura or something. Then I see this ad for a ...   10-21-2010 12:06 am