Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Suspension > Lower Front Arm strengthening

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Lower Front Arm strengthening  Rate Topic 
AuthorPost
 Posted: 09-20-2021 12:10 am
  PM Quote Reply
1st Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 512
Status: 
Offline
Here's good advice for anyone redoing their front suspension. The lower arm has 2 pices of support for the bolt on the backside, but only one "meager" support for the front of the bolt(see pix). For all the one I redo, I cut a circular piece of 1/8" + metal(one inch diameter or a little more is fine) to add strenght to the tremenduous force put on this area(see pix).
Hope this helps, bruce[img][/img]

Attachment: J-H front subframe lower arm welded support.jpg (Downloaded 21 times)

Back To Top PM Quote Reply  

 Posted: 09-20-2021 12:10 am
  PM Quote Reply
2nd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 512
Status: 
Offline
[img][/img]

Attachment: J-H front subframe lower arm welded support.jpg1.jpg1a.jpg (Downloaded 20 times)

Back To Top PM Quote Reply

 Posted: 09-20-2021 12:11 am
  PM Quote Reply
3rd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 512
Status: 
Offline
[img][/img]

Attachment: J-H front subframe lower arm welded support.jpg1.jpg2.jpg3.jpg (Downloaded 20 times)

Back To Top PM Quote Reply  

 Posted: 09-20-2021 12:11 am
  PM Quote Reply
4th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 512
Status: 
Offline
[img][/img]

Attachment: J-H front subframe lower arm welded support.jpg2.jpg (Downloaded 20 times)

Back To Top PM Quote Reply

Current time is 12:19 pm  
> Jensen Healey & Jensen GT Tech > Suspension > Lower Front Arm strengthening Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems