Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Oil Cooler Hose I.D. ?  Rate Topic 
AuthorPost
 Posted: 10-03-2019 05:13 pm
  PM Quote Reply
1st Post
Steve Duncan
Member
 

Joined: 09-12-2011
Location:  
Posts: 33
Status: 
Offline
Anyone know the inside diameter of the hoses that go to and from the oil cooler?

Back To Top PM Quote Reply  

 Posted: 10-03-2019 10:32 pm
  PM Quote Reply
2nd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 263
Status: 
Offline
without actually cutting one open, the connectors coming out of the hose are 1/2' while the short fittings to the sandwich are 9/16".
hope this may help, bruce

Back To Top PM Quote Reply

 Posted: 10-03-2019 10:49 pm
  PM Quote Reply
3rd Post
Steve Duncan
Member
 

Joined: 09-12-2011
Location:  
Posts: 33
Status: 
Offline
Thanks, but I'm hoping someone has cut one open so I can get an accurate measurement . I am planning on splicing in a preluber and would like to get the fittings in advance.

Back To Top PM Quote Reply  

 Posted: 10-25-2019 04:05 pm
  PM Quote Reply
4th Post
Steve Duncan
Member
 

Joined: 09-12-2011
Location:  
Posts: 33
Status: 
Offline
I can confirm (through cutting into two separate junked sets) that there are at least two possible IDs.

1/2" and 5/8"

Back To Top PM Quote Reply

Current time is 06:24 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Oil Cooler Hose I.D. ? Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems