Home 

 Moderated by: Greg Fletcher  
AuthorPost
Steve Duncan
Member
 

Joined: 09-12-2011
Location:  
Posts: 36
Status: 
Offline
Anyone know the inside diameter of the hoses that go to and from the oil cooler?

redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 296
Status: 
Offline
without actually cutting one open, the connectors coming out of the hose are 1/2' while the short fittings to the sandwich are 9/16".
hope this may help, bruce

Steve Duncan
Member
 

Joined: 09-12-2011
Location:  
Posts: 36
Status: 
Offline
Thanks, but I'm hoping someone has cut one open so I can get an accurate measurement . I am planning on splicing in a preluber and would like to get the fittings in advance.

Steve Duncan
Member
 

Joined: 09-12-2011
Location:  
Posts: 36
Status: 
Offline
I can confirm (through cutting into two separate junked sets) that there are at least two possible IDs.

1/2" and 5/8"



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems