| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Dellorto's need repair | Rate Topic |
| Author | Post |
|---|
| Posted: 05-09-2018 02:51 pm |
|
1st Post |
|
sjensen24 Member
|
I have a set of 45 dellortos that need repair. More than a simple rebuild. A couple of adjustment screws need to be drilled out and rethreaded. Also, housing is cracked between one screw and outside of housing; probably needs to be welded. I have found no one locally who will do it. Is there someone out there who does this level of work? thanks for any help.
|
||||||||||||||
| |||||||||||||||
| Posted: 05-10-2018 12:19 pm |
|
2nd Post |
|
Sander Member 
|
Well, he's the best guy in the business for SU/Zenith and I'm not sure if he'll work on Del's but you might contact Joe Curto, joecurto.com No, I'm not related in any way ....
|
|||||||||||||
| ||||||||||||||
| Posted: 05-10-2018 12:50 pm |
|
3rd Post |
|
Esprit2 Member
|
Have you tried The Carb Shop on the St Paul side of town? Two blocks south of Hwy 36 on White Bear AvN. http://www.thecarbguys.com/contact-us/ Sorry to say it, but from what you describe, I doubt the carbs are salvageable... but good luck with it. Is there any chance you'll be attending the InterMarque's Spring Kick-Off Car Show in Osseo this Saturday? Regards, Tim Engel Last edited on 05-11-2018 05:44 am by Esprit2 |
||||||||||||||
| |||||||||||||||
| Current time is 10:43 am | |
| > Jensen Healey & Jensen GT Tech > Carburetors > Dellorto's need repair | Top |
