Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Rust Converter  Rate Topic 
AuthorPost
 Posted: 07-03-2016 10:54 pm
  PM Quote Reply
1st Post
Bfitz241
Member


Joined: 02-05-2015
Location: Saint Augustine, Florida USA
Posts: 169
Status: 
Offline
Anybody use those rust converters from Eastwood or POR15 or Rustoleum?
Going to try one of them on the surface rust in the trunk and floors.  Nothing's rusted through, figure sanding, converting, and taking it from there.
Thanks

Back To Top PM Quote Reply  

 Posted: 07-04-2016 05:37 am
  PM Quote Reply
2nd Post
Tom Bradley
Member
 

Joined: 07-15-2013
Location:  
Posts: 200
Status: 
Offline
Rustoleum has worked well for me. What I have done is remove as much rust as possible using sandpaper, steel wool and wire brushes, clean, then coat with two or three thin coats of rustoleum's rusty metal primer, then paint. Some of this was done over twenty years ago and still no problems. Not nearly as smooth as a professional job though.

Back To Top PM Quote Reply

 Posted: 07-05-2016 02:35 pm
  PM Quote Reply
3rd Post
Arvin Appelman
Member
 

Joined: 03-14-2005
Location: Columbia, Tennessee USA
Posts: 50
Status: 
Offline
I've used POR15 with great success even in battery storage areas on an RV. Just follow recommendations for any of the products you listed and you should be happy.

Back To Top PM Quote Reply  

Current time is 06:41 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Rust Converter Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems