Home 

 Moderated by: Greg Fletcher  
AuthorPost
Bfitz241
Member
 

Joined: 02-05-2015
Location: Saint Augustine, Florida USA
Posts: 159
Status: 
Offline
Anybody use those rust converters from Eastwood or POR15 or Rustoleum?
Going to try one of them on the surface rust in the trunk and floors.  Nothing's rusted through, figure sanding, converting, and taking it from there.
Thanks

Tom Bradley
Member
 

Joined: 07-15-2013
Location:  
Posts: 95
Status: 
Offline
Rustoleum has worked well for me. What I have done is remove as much rust as possible using sandpaper, steel wool and wire brushes, clean, then coat with two or three thin coats of rustoleum's rusty metal primer, then paint. Some of this was done over twenty years ago and still no problems. Not nearly as smooth as a professional job though.

Arvin Appelman
Member
 

Joined: 03-14-2005
Location: Columbia, Tennessee USA
Posts: 50
Status: 
Offline
I've used POR15 with great success even in battery storage areas on an RV. Just follow recommendations for any of the products you listed and you should be happy.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems