Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Steering wheel adaptor  Rate Topic 
AuthorPost
 Posted: 12-20-2014 01:50 am
  PM Quote Reply
1st Post
scottsmi
Member
 

Joined: 10-18-2011
Location:  
Posts: 36
Status: 
Offline
Does anybody have recommendations for a wood steering wheel for my JH? I understand I need a adapter kit as well. I called delta and they are out.

Back To Top PM Quote Reply  

 Posted: 12-21-2014 10:02 am
  PM Quote Reply
2nd Post
gmgiltd
Member
 

Joined: 07-10-2012
Location: Whitehills , United Kingdom
Posts: 168
Status: 
Offline
Try Moto Lita in the UK - they are expensive but absolutely top quality I have the leather one on My GT on which the cowl shroud needed to be modified slightly they are intended for the JH. Comes with all the bits you need to install.
https://www.moto-lita.co.uk/our-products/your-car/Wheel_Details.aspx?CR_ID=154&CB_ID=18&WH_ID=3
Gordon

Back To Top PM Quote Reply

 Posted: 01-05-2017 02:10 am
  PM Quote Reply
3rd Post
Earthscrew
Member
 

Joined: 08-01-2014
Location:  
Posts: 25
Status: 
Offline
I know this is an old subject, however I have wanted to change out my cracked original steering wheel but did not wish to pay the price for the adaptor, as I have already invested far more than ever anticipated in this car.

After much research, I found that the Grant adapter number 3597 fits perfect. Contrary to what I have read everywhere, I can not find a single adapter for an old GM that fit my 5/8" shaft.

The 3597 fits older Mazdas, and a couple Fords and cost me $24.00 at Pep Boys.

I ordered a 15" wood walnut wheel from Grant off Amazon for $125.00 and it looks great to me.

Back To Top PM Quote Reply  

 Posted: 01-07-2017 05:03 pm
  PM Quote Reply
4th Post
scottsmi
Member
 

Joined: 10-18-2011
Location:  
Posts: 36
Status: 
Offline
Thanks for the update. I have been wondering about how to get an adapter and have seen one on Ebay for $200!

Back To Top PM Quote Reply

 Posted: 01-07-2017 05:39 pm
  PM Quote Reply
5th Post
Earthscrew
Member
 

Joined: 08-01-2014
Location:  
Posts: 25
Status: 
Offline
Glad I could help, Grant is a much more resonable approach for a steering wheel and you can get it at any Pep Boyd. They happened to have it in stock at the Simi Valley store, but even if they need to order it, no big deal.

Best regards!

Back To Top PM Quote Reply  

 Posted: 01-07-2017 10:36 pm
  PM Quote Reply
6th Post
Frank Schwartz
Member
 

Joined: 02-18-2011
Location:  
Posts: 313
Status: 
Offline
Maybe you can post a picture or two???and what emblem is in the center of the "new" wheel???

Back To Top PM Quote Reply

 Posted: 01-07-2017 10:44 pm
  PM Quote Reply
7th Post
Earthscrew
Member
 

Joined: 08-01-2014
Location:  
Posts: 25
Status: 
Offline
I am happy to, but cannot figure out how to move the pictures into this blog???

Back To Top PM Quote Reply  

 Posted: 01-07-2017 10:58 pm
  PM Quote Reply
8th Post
Earthscrew
Member
 

Joined: 08-01-2014
Location:  
Posts: 25
Status: 
Offline
Tried to post a picture, but I get a message telling me that the file is too big, only one photo do I do not know what is wrong.


I can tell you it has no emblem, simply a plain chrome plate, actually looks
quite good for an inexpensive wheel

Back To Top PM Quote Reply

 Posted: 01-08-2017 09:15 pm
  PM Quote Reply
9th Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
You need to host your photos at a service like Photobucket which creates "img" tags. Then paste the tag into your post.

I'm not an expert on the nuances of photo hosting, but learned to get it working from Subwoofer.

Perhaps he will be so kind as to start a thread with instructions.

Kurt

Back To Top PM Quote Reply  

 Posted: 01-08-2017 10:00 pm
  PM Quote Reply
10th Post
Earthscrew
Member
 

Joined: 08-01-2014
Location:  
Posts: 25
Status: 
Offline
Kurt,

I no so good at this either, I will turn this over to my wife as she understands a bit more!

Regards

Back To Top PM Quote Reply

 Posted: 01-19-2017 04:23 am
  PM Quote Reply
11th Post
dbeliveau74
Member


Joined: 12-28-2015
Location: Manchester, New Hampshire USA
Posts: 53
Status: 
Offline
You can use an app like PIXresizer to make the pic small enough to post on this forum. You can find it by doing a search for the name and its free!!
cheers,
Dan

Back To Top PM Quote Reply  

 Posted: 01-19-2017 04:26 am
  PM Quote Reply
12th Post
dbeliveau74
Member


Joined: 12-28-2015
Location: Manchester, New Hampshire USA
Posts: 53
Status: 
Offline
Here is an example of a reduced pic of my dash and wheel. Not sure of the adapter or wheel source as it was installed by the PO.

Attachment: DSC_1099 (600 x 397).jpg (Downloaded 124 times)

Last edited on 02-25-2017 01:54 am by dbeliveau74

Back To Top PM Quote Reply

 Posted: 02-24-2017 07:17 pm
  PM Quote Reply
13th Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
I too started with the 3597 adapter, but since I wanted a Nardi wheel (same as Momo bolt pattern) I flipped it over so it wouldn't travel too far down the shaft, peeled off the useless copper horn contact panel, drilled two holes for grub screws to activate the turn signal reset.

Then the fun began. To get enough depth for the steering shaft I had to use a 1" Chinese adapter which had the wrong bolt pattern (Forever Sharp) and a .5" adapter which could have gone from Grant to Nardi, cut out its center and countersunk the Forever Sharp bolt pattern to take 5mm allen screws. See attached pix.

Total price $24+$14+$12 all on eBay, plus a couple of bucks for screws. Now the Nardi wheel fits and everything works like it is supposed to. Horn on the left column lever was actually an advantage in this situation.

Attachment: JH nardi wheel adapter front small.jpg (Downloaded 99 times)

Last edited on 02-24-2017 07:17 pm by allstateguy

Back To Top PM Quote Reply  

 Posted: 02-24-2017 07:20 pm
  PM Quote Reply
14th Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
the side facing the column

Attachment: JH nardi wheel adapter small.jpg (Downloaded 98 times)

Back To Top PM Quote Reply

 Posted: 02-24-2017 07:20 pm
  PM Quote Reply
15th Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
with the wheel, but not attached yet, more work to do under the dash

Attachment: wheel w adapter I made 2-23-17 small.jpg (Downloaded 100 times)

Back To Top PM Quote Reply  

Current time is 06:12 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Steering wheel adaptor Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems