Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel line from gas tank

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Fuel line from gas tank  Rating:  Rating
 Posted: 02-17-2013 01:40 am
  PM Quote Reply
1st Post

Joined: 08-31-2012
Posts: 21
How is the steel fuel line from the tank to the engine compartment supposed to end?

Right now it has a flare nut coupling to what appears to be a soft plastic compression fitted hose of unknown composition. The PO has clamped an in line fuel filter to the end of that hose and the other end of the filter is clamped to rubber fuel line which continues to the well known arsonist Mr.(plastic)T.

I shall replace the plastic T but I am very suspect of his buddy that has been positioned before him.

What is the correct configuration? Any thoughts or positive comments are appreciated.

Back To Top PM Quote Reply  

 Posted: 02-17-2013 02:01 am
  PM Quote Reply
2nd Post

Joined: 05-15-2006
Location: Tempe, Arizona USA
Posts: 217
Correct configuration is to a straight end with no fitting. Fuel line is clamped on over line and connects to T.

Back To Top PM Quote Reply

Current time is 06:09 am  
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel line from gas tank Top

UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems