Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Cowl Shake  Rate Topic 
AuthorPost
 Posted: 09-06-2011 07:11 pm
  PM Quote Reply
1st Post
Dakota123
Member
 

Joined: 03-20-2009
Location: Colorado USA
Posts: 126
Status: 
Offline
I imagine someone out there has installed strategic stiffening to reduce cowl shake and improve handling -- any photos or descriptions to share (other than the obvious full roll cage)?

Thanks!

Mike

Back To Top PM Quote Reply  

 Posted: 12-07-2012 07:22 pm
  PM Quote Reply
2nd Post
roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 80
Status: 
Offline
If you feel scientific, you might do a torsional deflection test, as a baseline , before mod's begin. PITA bars,(diagonals) from front suspension/rail area, to load spreader plates, on the firewall, should help. These plates "might" be joined on the inside of firewall, with smaller diameter tubing, formed and welded to top or bottom corners, of the tunnel, to the rear kick-up area.   Good Luck, roverman.

Back To Top PM Quote Reply

Current time is 06:19 pm  
> Jensen Healey & Jensen GT Tech > Suspension > Cowl Shake Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems