Home 

 Moderated by: Greg Fletcher  
AuthorPost
Dakota123
Member
 

Joined: 03-20-2009
Location: Colorado USA
Posts: 126
Status: 
Offline
I imagine someone out there has installed strategic stiffening to reduce cowl shake and improve handling -- any photos or descriptions to share (other than the obvious full roll cage)?

Thanks!

Mike

roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 80
Status: 
Offline
If you feel scientific, you might do a torsional deflection test, as a baseline , before mod's begin. PITA bars,(diagonals) from front suspension/rail area, to load spreader plates, on the firewall, should help. These plates "might" be joined on the inside of firewall, with smaller diameter tubing, formed and welded to top or bottom corners, of the tunnel, to the rear kick-up area.   Good Luck, roverman.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems