View single post by Brett Gibson JH5 20497
 Posted: 10-24-2010 02:35 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497

 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
 Well I have been reading along on your trials and tribulations, looking at the pictures and will chip in with my two cents.

First the thing with the bent wiring connections above the oil pressure tie in hose is part of the emmisions, you dont need it.

Second your wiring is in need of attention, if that red wire taped up is any indications your whole problem is probably dirty contacts and or broken wires, putting power to the coil with an additional wire tells you that.

Step back and start cleaning stuff up, check your wires for continuity, clean up your grounding wires, there are no quick fix's when your dealing with a car 35 years old, and your old Allison system is probably still good seeing you have the same issue using the Protonics.

Best of luck

Brett.