| Howdy folks, I have seen some horror stories about oil pumps not working after a rebuild. I am in the middle of a rebuild right now. I have put most of the engine back together. This has been a serious labor of love and I don't want to screw it up with a dumb mistake, especially one that fellow club members have already solved. So I am asking for some assistance on how to do this. I took the oil pump apart and cleaned all the parts by hand. Now I have it back together on the engine with a re-built oil pickup tube. I have filled the oil pan with 4 quarts. I am using a speed wrench with a hex key to crank the oil pump clockwise at about 3 times per second. I can not get it to push oil out through the top of the valves, or anywhere else for that matter. What am I doing wrong? I have included a picture of how the engine looks now. Other pictures including a breakdown of the oil pump pieces are on my site. http://jen.fransella.com Is there another place to put some of these pictures? I have a ton. Thanks in advance for any help that y'all can offer. I would really like to drive it to the 30th South Texas Healy Roundup in Fredricksburg TX on April 16-19th http://www.stahc.org/content/links.php Let me know if anyone else is going. Last edited on 10-30-2014 03:34 am by Boxedwino
|
