View single post by Brett Gibson JH5 20497
 Posted: 02-07-2010 08:43 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497


Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 736
flatlanderep wrote: i guess that was my next question. how do you drain the floats bowls on the stroms?

Pretty simple really, just feel under each carb and you should detect a round brass plug in the middle of each, 3/4" dia. its only held in by a O-ring, so just wiggle it while pulling down and it should come out, if it's a bit stuck use a screw driver to wedge it  but be careful the plug housing is actually plastic. If you should bust it most Brit place's have new ones. If you can, replace the o-ring with a new one, or at least smear it with a gasoline proof gasket compound when putting back in.