View single post by jcdean
 Posted: 11-03-2006 05:31 pm
PM Quote Reply Full Topic
jcdean

 

Joined: 02-22-2006
Location: Oklahoma City, Oklahoma USA
Posts: 169
Status: 
Offline
I have the rear flat piece out of the old top and have removed the bulges and bends.  There is still a set to the piece that basically causes both ends to bow in the same direction.

I see advantages to having these installed pointing up (forces the middle back to lay a bit flatter) and down (more of a natural flow following the lines of the car).

Opinions are appriciated.