View single post by Dave Sollish
 Posted: 04-04-2006 12:02 pm
PM Quote Reply Full Topic
Dave Sollish


Joined: 02-03-2006
Location: West Suffield
Posts: 12
I have had good luck making a custom seal for that area using silicone RTV. I first covered the top of the door window and windshield with plastic wrap. Then I packed the silicone into the area of the soft top that makes contact with the window/windshield. I used black silicone as my top is also black. Lock the top down as normal, smooth the silicone squeeze out (like you were caulking a tub) and let cure. Note: when you smooth out the silicone that you need to leave clearance to open the door with the top on so no overhang on the outside of the door. When cured open top, peel away the plastic wrap and you're done!