View single post by redracer
 Posted: 12-23-2020 01:18 am
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 626
Status: 
Offline
 The glue was put on only the underside of the front bow(if you ordered a top from the dealer, it came with a bow already glued to the new top).
Would recommend grinding off sharp edges, especially at the corners where most of the failures occur. Would recommend also that the two edges of the bow be ground to form one smooth edge before using glue.