 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 07-10-2012 |
| Location: | Whitehills , United Kingdom |
| Posts: | 168 |
| Status: |
Offline
|
Not familiar with your setup but on my GT vacuum goes from the inlet to a 'T' and leads directly to the non return valve on the inlet of the servo. A smaller 3mm hose goes from the 'T' to a vacuum operated air distribution valve under the dash then another hose back to the water valve bolted to the cam cover which regulates the water to the heater. I believe Stromberg equipped cars had an additional 'T' and vacuum hose to the distributor which was not on the Dellortos.
A good source for all kinds of Motorsport bits is Merlin Motorsport - good to deal with and ship international. They have the hoses you need.
https://www.merlinmotorsport.co.uk
Gordon