Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Brakes > Vaccum Hose for servo unit.

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Vaccum Hose for servo unit.  Rating:  Rating
AuthorPost
 Posted: 08-03-2014 03:35 pm
  PM Quote Reply
1st Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
Hi,

I have had problems with my servo unit lately and it has turned out they my old vacuum hose was blocked, needs to be replaced.

I goes from the inlet manifold to a small plastic T. From the T there is a connection to the servo unit and a small hose going to the small valve mounted inside the car next to the heater.

In the small hose i found a non return valve . It was mounted correctly meaning that the engine could draw vacuum through it.

Any Idea on why it is mounted inside this hose?

What kind of hose are you using as Vaccum Hose? Connections on both manifold and servo unit is 10 mm.

BR
kim

Last edited on 08-03-2014 03:36 pm by Barthol

Back To Top PM Quote Reply  

 Posted: 08-04-2014 07:38 am
  PM Quote Reply
2nd Post
gmgiltd
Member
 

Joined: 07-10-2012
Location: Whitehills , United Kingdom
Posts: 142
Status: 
Offline
Hi Kim,
Not familiar with your setup but on my GT vacuum goes from the inlet to a 'T' and leads directly to the non return valve on the inlet of the servo. A smaller 3mm hose goes from the 'T' to a vacuum operated air distribution valve under the dash then another hose back to the water valve bolted to the cam cover which regulates the water to the heater. I believe Stromberg equipped cars had an additional 'T' and vacuum hose to the distributor which was not on the Dellortos.
A good source for all kinds of Motorsport bits is Merlin Motorsport - good to deal with and ship international. They have the hoses you need.
https://www.merlinmotorsport.co.uk
Gordon

Back To Top PM Quote Reply

Current time is 09:12 am  
> Jensen Healey & Jensen GT Tech > Brakes > Vaccum Hose for servo unit. Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems