View single post by Brett Gibson JH5 20497
 Posted: 11-30-2010 01:18 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497

 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
 Besides the tip for letting the sun shine on it, all the frame rails should have plastic bushings that the screws go thru with lock nuts on the back, they should not be tight but not to sloppy either.

Also the top adjustment (tension) comes from the mounting plate on either side of the car just behind the seats, if you are really stuck just loosen the plate up a bit and let it down a tad, but doing this can get difficult in trying to get the proper tension and may require alot of adjustments.

Good luck

Brett

Ps. STOP SHOUTING