Absolutely correct about making sure that the throttle is fully open with the pedal all the way to the floor. Adjust the cable to ...   10-26-2021 07:05 am

I’ll still look for you if you don’t get any other responses. Please give me a call and we can discuss or give me ...   10-12-2021 03:09 pm

This is Randall Clary, I own 13046 and live in Riverside, CA. OI restored my car about 5 years ago and it is running ...   10-08-2021 03:49 am

Sold five years ago. ...   04-29-2021 01:11 am

I recently changed plugs on my JH 2.2 vin # 13046. Car has Del 45 Carbs with 104/107 cams. Static Timing 12 ...   04-30-2020 09:05 pm

Thanks Tim. Do my other comments seem ok? ...   11-05-2018 08:58 pm

I forgot to add the firing order 1-4-3-2. I’m fairly sure of that. Randy Clary 909-938-2090 ...   11-05-2018 12:54 pm

If you want me to walk you thru it on the phone, call me at 909-938-2090. It’s fairly simple process once you do it ...   11-05-2018 03:40 am

Turn the engine over manually by 1st removing the plugs then get #1 piston to TDC with the cam shaft marks in a matched position ...   11-05-2018 03:37 am

It works. Keeps heat out of the interior. It deadens road noise and it’s especially good if you affach a strip inside each ...   10-23-2018 06:24 am

Easiest way to get to the back clip is to first note the position of the distributor which should be correct when the timing is ...   10-22-2018 04:13 am

So have you checked the small basket filters on each carb just the fuel line. Sometimes debris builds up and causes blockage. ...   10-06-2018 06:39 am

Many of us are retired and have taken the time to get the cars right mechanically and electrically for the sake of reliability. We ...   09-30-2018 08:57 pm

Come to our JH meetings each month at Round Table Pizzain Costa Mesa and bring your JH. We usually have from 3 to 6 ...   09-29-2018 04:00 pm

My comment to this is this will not give you the correct belt tension, only tighten against the tension adjustment but. I went a ...   05-03-2018 05:15 am

I recently rebuilt 13046 with a stroker crank conversion and 104 & 107 cams with 45 Delorottos and 10.5:1 pistons and ported polished rebuilt head ...   12-13-2017 04:04 pm

The manufacturer of the wheels is VTO. I purchased a seet of the 15" wheels and absoutely love them Here is the link. They also ...   06-15-2017 04:49 am

Were you talking about the 1973 JH Silver 13046 with the 195-60-15's front and the 205-60-15's on the rear? They definitely fill up the ...   05-22-2017 01:54 am

Thanks for the advise. ...   04-06-2017 01:26 am

Hey Guys One of the dangers of driving the JH everyday is having a rock invade your space. Well my JH took a hit last ...   04-05-2017 03:02 pm

Hey Guys One of the dangers of driving the JH everyday is having a rock invade your space. Well my JH took a hit last ...   04-05-2017 02:57 pm

Hey Guys One of the dangers of driving the JH everyday is having a rock invade your space. Well my JH took a hit last ...   04-05-2017 02:52 pm

I can't give you any part numbers, but I have done exactly that plus put Duramat by Eastwood around the opening and I get zero ...   11-22-2016 05:51 am

I bought an aluminum fuel tank that was new from this seller on eBay and I was fairly happy with the result. I did ...   11-19-2016 05:13 am

On #13046 I used Eastwood Dynamat on most of the panels and floors of my car including the trunk and under the fuel tank. ...   10-05-2016 04:33 am

We finally found out what was causing the problem on my @13046 with the Delorttos and 2.2 Stroker Crank. Found out that the forward ...   10-03-2016 04:19 pm

Another pic before we installed the rebuilt stroker crank engine. I need to find out how to add multiple photos. My photos are ...   09-12-2016 05:45 am

Another pic ...   09-12-2016 05:44 am

Another pic ...   09-12-2016 05:43 am

Another pic ...   09-12-2016 05:43 am

Another pic ...   09-12-2016 05:42 am

Another pic ...   09-12-2016 05:42 am

Finally going to update project status. I am almost complete. For the past several months I have had a heck of a time ...   09-12-2016 05:41 am

Almost complete with 13046. Here is a good photo of the new wheels with 196-60R-15 on the front and 205-60R-15 on the rear on ...   09-12-2016 05:08 am

Here is a photo of the tires mounded on my 13046 recently restored JH ...   09-12-2016 04:39 am

Pic of the like new tred for the tires ...   09-12-2016 04:38 am

I just replaced my 13 * Aluminum wheels (not OEM) with VTO 15" rims and what a difference. WIth that said, I now have ...   09-12-2016 04:36 am

Have you checked the float setting on the Dellorto's. Also there is a filter basket that is attached to the fuel input portion of ...   08-26-2016 04:09 am

I used the Eastwood product and am very happy with it. There seems to be little engine or exhaust heat radiating into the passenger ...   07-25-2016 05:16 am

I couold also use some ideas of what may be causing the indicated rpm fluctuations on the tach. The engine revs very smoothly but ...   05-26-2016 05:03 pm