Home 
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel system - sending unit

 Moderated by: Greg Fletcher  
AuthorPost
Rdinstel
Member
 

Joined: 10-09-2019
Location:  
Posts: 21
Status: 
Offline
I recently purchased a fuel tank for my 1974 Jensen Healey Mark II from Compbrake in England.
Unfortunately the sending unit leaks.
I emailed Compbrake and am waiting to hear back, but wondered if anyone had any idea of who else may have a unit that would fit the Compbrake tank?
Just this morning I contacted Mike at Delta, hopefully he has some ideas - he has been very helpful in the past.
Ray

redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 650
Status: 
Offline
Sorry you purchased that: I had written this past year about this, and they are poorly designed. Martin Robey's one, although a little more expensive, would have been MUCH better with NO hassling.
Here is the write up I did along with other's comments in this forum"
http://www.jensenhealey.com/forums/view_topic.php?id=2790&forum_id=14&highlight=redracer%2C+gas+tank

Rdinstel
Member
 

Joined: 10-09-2019
Location:  
Posts: 21
Status: 
Offline
Thanks for much for getting back to me so fast.
I wish I had read your post earlier.
Do you have contact info for Martin Robey?
Ray

redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 650
Status: 
Offline
https://www.martinrobey.com/
Since you are now "STUVCK" with this fuel tank, in that article I attached, you should find a decent sending unit info as well as the stuff I had to modify to make it work.
We had contacted this supplier of this poorly designed tank with no luck, but maybe you will have better luck??(doubt it)



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems