Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher Page:    1  2  Next Page Last Page  
New Topic Reply Printer Friendly
My JH & Delta  Rate Topic 
AuthorPost
 Posted: 02-07-2015 03:56 pm
  PM Quote Reply
1st Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
On December 16, 2014 I had my 74 1/2 JH transported to Delta Motorsports in Phoenix for service and to replace the pilot bearing. I did this because the car has low, original miles, is in very stock, original condition and I could not find a shop here in the Las Vegas area that I felt confident would do a good job on my car. My thinking: Who would know more about JHs and what better place to have any part that might be needed than Delta Motorsports? Although I don’t think he normally works on JHs, my car was so stock and original that Delta Motorsports owner Michel DOLimpio graciously agreed to the job. I was thrilled! Think of it, the owner of Delta Motorsports, where we all have purchased hard-to-find original and replacement JH parts for years, is working specifically and ONLY on my car! I told Mike to “Take your time. No rush.” Ha! These proved to be the longest days of of my life. Being without my car. Waiting, day after day, worse at night. Mind games! To help get me through these rough days was Mike’s reassuring email to me: “I know its hard to be away, but she is in good hands.” On 2-4-2015, I got my car back and was I shocked! I had no need to worry about anything. It looked exactly the way it looked before it left, even after it’s extensive servicing. Everything was perfect ... do I say, even better? Yes! In some cases, better because some components were updated. All new hoses, lines, belts, bushings, etc. More than I could have ever imagined. The car was completely serviced and and inspected. Nothing major needed to be replaced but after 40 years, some things needed attention. Now my JH runs and feels like it must have when it came out of the factory. Mike did a spectacular job! If you can, and he agrees to work on your car, in my opinion, TAKE IT TO HIM! Mike is awesome and to say the least, the best JH guy around! I’m very satisfied. His final email: “I do believe we are all done and again Thank you for letting me perform the repairs on your wonderful Jensen Healey.” Believe me Mike, the pleasure was all mine :)

( Pics: http://s255.photobucket.com/user/VegasJensenMan/media/74%20Jensen%20Healey/IMG_2702.jpg.html)

Last edited on 05-29-2016 03:47 am by JohnRLB

Back To Top PM Quote Reply  

 Posted: 02-07-2015 06:55 pm
  PM Quote Reply
2nd Post
Screenplay
Member
 

Joined: 07-12-2013
Location: San Francisco, California USA
Posts: 124
Status: 
Offline

Last edited on 02-07-2015 06:56 pm by Screenplay

Back To Top PM Quote Reply

 Posted: 02-07-2015 06:55 pm
  PM Quote Reply
3rd Post
Screenplay
Member
 

Joined: 07-12-2013
Location: San Francisco, California USA
Posts: 124
Status: 
Offline
John,

Great to hear of your experience with Mike at Delta. I had an issue with rear springs purchased there recently (highlighted in a post under suspension) that he was unaware of. I was impressed with his dedication to figuring out a solution. It would be great to see some pics of your JH but I see that the link is not working properly.

Best of luck.
Clinton

Last edited on 02-07-2015 06:55 pm by Screenplay

Back To Top PM Quote Reply  

 Posted: 02-07-2015 07:27 pm
  PM Quote Reply
4th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Try this for a link. If it doesn't work, I'm not copying it right. http://s255.photobucket.com/user/VegasJensenMan/library/74%20Jensen%20Healey See my Foot 2 Big story/question I posted earlier for the correct link. Pictures were taken before Mike's repairs. They show the red covered VCs and orange gaskets. They now look like new and very original. I guess those big old orange gaskets aren't needed because they aren't on my car and no oil leaks yet. Some history of my car there too.

Back To Top PM Quote Reply

 Posted: 02-07-2015 09:26 pm
  PM Quote Reply
5th Post
Screenplay
Member
 

Joined: 07-12-2013
Location: San Francisco, California USA
Posts: 124
Status: 
Offline
Very nice car and so clean - even the trunk carpet which usually shows some kind of wear. It must be one of the lowest documented mileage JH's around. I wonder if that bit of info is known - yours would have to be a contender.

Happy Driving,
Clinton

Back To Top PM Quote Reply  

 Posted: 02-07-2015 09:53 pm
  PM Quote Reply
6th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Sorry, no more info but thanks for the compliments. Appreciated. It's so tight. I don't remember my first JH (a new 74) being as tight as this one is now. Unbelievable!

Back To Top PM Quote Reply

 Posted: 02-08-2015 09:03 pm
  PM Quote Reply
7th Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Nice!
It appears your car is one of the backdated cars made in 1975. One of my cars is also 12/31/1974 JH5 vin# 19753.
Richard Calver confirmed that Jensen was using up their stock of 1974 parts in 1975 and backdated several hundred cars. There were federal pollution control changes in 1975.
Kurt

Back To Top PM Quote Reply  

 Posted: 02-08-2015 09:24 pm
  PM Quote Reply
8th Post
Screenplay
Member
 

Joined: 07-12-2013
Location: San Francisco, California USA
Posts: 124
Status: 
Offline
Kurt, Thanks for clearing that up. My 19451 was built 12-22-74 and it would have meant that Jensen built more than 300 of them in a 9 day period - and over Christmas at that.

Clinton

Last edited on 02-08-2015 09:24 pm by Screenplay

Back To Top PM Quote Reply

 Posted: 02-09-2015 06:10 pm
  PM Quote Reply
9th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
John: Mike had his own shop in California for many years. He is a super mechanic and "go-getter" for anything J-H. You would have been hard pressed to find a better mechanic for your car.

Happy Healeying, bruce madden

Back To Top PM Quote Reply  

 Posted: 02-09-2015 06:12 pm
  PM Quote Reply
10th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
John: just looked at your pix; I would STRONGLY recommend you put something over your driver's side floor mat as they are "Unobtainium"(as far as I know)

Back To Top PM Quote Reply

 Posted: 02-09-2015 06:59 pm
  PM Quote Reply
11th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Not pictured are my OVER PROTECTVE original JH floor mats. Trust me, the original JH driver floor mat looks identical to the passenger side mat. I guess that's what you're talking about. By the way, my car was picked up by United Routes carriers 12-16-2014 by itself on a covered transport trailer. Shared with a Ferrari and Viper on the way back. Just enough room on the longest (covered) transport trailer Ive ever seen!

Back To Top PM Quote Reply  

 Posted: 02-09-2015 07:02 pm
  PM Quote Reply
12th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
Nice going! Glad to hear the other two cars were in good company!!

Back To Top PM Quote Reply

 Posted: 03-05-2015 02:28 pm
  PM Quote Reply
13th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Oh, I almost forgot. The car would have been back a few days earlier but when it was ready for a final test drive, it rained in Phoenix and continued for 3 days. Even though the top was up, Mike thought I probably wouldn’t want it driven in the rain so he waited till it stopped. So thoughtful and considerate. Unheard of! He really cared for my car.

Back To Top PM Quote Reply  

 Posted: 05-27-2015 02:22 pm
  PM Quote Reply
14th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
A transport tip: Want to have your JH transported? Forget calling Reliable Carriers (the orange 18 wheelers seen on TV car shows) because they don’t ship JHs. What? That’s what they told me. I guess not "high-end" enough. United Routes did a good job for me. So there!

Back To Top PM Quote Reply

 Posted: 09-14-2015 03:08 pm
  PM Quote Reply
15th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Had Madera Concepts replace most of the wood on my dash with burled walnut. Awesome job! Now just waiting for Collision Wheel Center to finish restoring a set of JH wheels. I’ve asked to be put of the list of guys waiting. I’ve decided to enter my car in a few local car shows and have been working on a info presentation poster with factory literature, pictures, etc. Believe it or not, I’m stumped on how to briefly and correctly describe this stock Lotus engine. Anyone got some ideas? Everyone that has seen my car says that because it’s so stock and clean, it might win some awards. We’ll see.

Back To Top PM Quote Reply  

 Posted: 09-15-2015 01:17 pm
  PM Quote Reply
16th Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
A very sophisticated engine for it's day.

Back To Top PM Quote Reply

 Posted: 09-15-2015 05:28 pm
  PM Quote Reply
17th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Thanks but I need tech stuff like engine size, liters, etc

Back To Top PM Quote Reply  

 Posted: 09-18-2015 05:38 am
  PM Quote Reply
18th Post
Tom Bradley
Member
 

Joined: 07-15-2013
Location:  
Posts: 203
Status: 
Offline
4-cylinder, 2 liter, aluminum alloy block, dual overhead cams, 4 valves per cylinder, wet sleeve. All standard stuff nowadays, but I read that it was the first that put all this together in one engine.

Back To Top PM Quote Reply

 Posted: 09-18-2015 02:07 pm
  PM Quote Reply
19th Post
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Thanks so much Tom. Now I can complete my presentation info poster for folks that might say “What’s that?” at local car shows. Ha!

Back To Top PM Quote Reply  

 Posted: 09-19-2015 04:36 pm
  PM Quote Reply
20th Post
Tom Bradley
Member
 

Joined: 07-15-2013
Location:  
Posts: 203
Status: 
Offline
Oops. Forgot to mention that the engine was a slant-4, tilted over at about 45 degrees rather than straight up or flat like VW/Poshe engines. This lowered the total height, making for a lower center of gravity and hoodline. Another standard thing today.

Bottom line was it produced over 140HP stock from a light-weight 2L engine while meeting federal emission standards, which was unprecedented at the time. Other comparable roadsters (MG, Triumph, Porsche) were producing about 100HP from similar-sized (or even larger) engines.

Back To Top PM Quote Reply

Current time is 03:05 pm Page:    1  2  Next Page Last Page    
> Jensen Healey & Jensen GT Tech > Miscellaneous > My JH & Delta Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems