Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Gas cap to neck gasket

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Gas cap to neck gasket  Rate Topic 
AuthorPost
 Posted: 11-18-2013 03:27 pm
  PM Quote Reply
1st Post
Art DeKneef
Member
 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
Anyone know of a replacement or substitute. Delta does not have this piece. There is no replacement number in the catalog/parts list.

The flip-up gas cap has a gasket/sealer underneath held on by a screw. Underneath the gasket is a spring to provide tension against the neck to help provide a good seal. It looks like it's made by pressing two pieces of metal together with a rubber gasket between and exposed on the ends.

Thought I would ask before I start searching.

Back To Top PM Quote Reply  

 Posted: 11-19-2013 07:18 pm
  PM Quote Reply
2nd Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
Art, I would go to Mcmaster-Carr and buy a piece of gasket material that is gasoline compatable and just cut your own using the old one as a template.

Brett

Back To Top PM Quote Reply

 Posted: 11-20-2013 12:12 am
  PM Quote Reply
3rd Post
Art DeKneef
Member
 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
That's what I am doing. I got around to really looking at it and discovered it is two pieces of metal pressed fit together and holds the rubber gasket in place. Pretty simple actually. Just have to get the rubber sheet and cut out the gasket.

Back To Top PM Quote Reply  

Current time is 02:52 pm  
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Gas cap to neck gasket Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems