| ||||
Moderated by: Greg Fletcher |
|
Gas tank | Rate Topic |
Author | Post |
---|
Posted: 09-08-2013 10:32 pm |
|
1st Post |
scottsmi Member
|
Just wondering what club members used in the trunk under the gas tank. My Jensen didn't have anything in it but a badley rusted tank sitting on the metal. I was thinking about someway to allow air under tank to prevent rust. Any thoughts?
|
||||||||||||||
|
Posted: 09-09-2013 05:50 am |
|
2nd Post |
answerman Member
|
I remember someone once mentioning taking a couple of lengths of rubber fuel line and using them as standoffs. That's something I will be looking at this winter when Ms. J gets her makeover.
|
|||||||||||||
|
Posted: 09-09-2013 02:00 pm |
|
3rd Post |
Jensen Healey Super Moderator
|
A used toothed cam belt has been mentioned in the past.
|
||||||||||||||
|
Posted: 09-09-2013 09:55 pm |
|
4th Post |
Ron Mau Member
|
I used a couple of rubber bungee cords. Seems to work ok
|
|||||||||||||
|
Posted: 03-22-2015 09:30 pm |
|
5th Post |
Jensenman Member
|
I got a pair of those thick rubber splash guards for a pickup and cut approx 1" wide slices. http://www.northerntool.com/shop/tools/product_200316137_200316137 Painted the outside of the tank then glued 5 of these strips to the underside and reinstalled the tank. You might also want to reseal the fill neck grommet to slow down water getting into the trunk.
|
||||||||||||||
|
Current time is 02:45 pm | |
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Gas tank | Top |