View single post by Arvin Appelman
 Posted: 04-25-2005 01:29 am
PM Quote Reply Full Topic
Arvin Appelman


Joined: 03-14-2005
Location: Columbia, Tennessee USA
Posts: 50
I cut two pieces of 1/4" plywood (appox. 3/4" X 1 1/4"), centered the pieces over the screw holes, marked the border, and removed enough of the old foam to make a tight pocket for the plywood.  I used  Household Goop adhesive to glue them in place.  I put enough on them on so it squeezed out when I clamped them in place.

I have installed the pod and used care not to over tighten.  So far so good.