View single post by John Finch
 Posted: 05-09-2006 03:38 pm
PM Quote Reply Full Topic
John Finch


Joined: 08-01-2005
Location: Minneapolis MN
Posts: 122
IIRC there are 5 phillips head screws to remove then you have to work the rock guard out. I had the tires off for better access. I used a putty knife to loosen hardened dirt mostly on the floor area and a vacuum to remove it. I don't think my arms would have reached to the badge area and it gets pretty tight in there anyway. I did spray undercoating inside "as long as I was there" before reassembly. I also sealed the rock guard edges with silicone and resprayed undercoating on the outside of the rock guards.