View single post by discogodfather
 Posted: 12-02-2020 07:04 am
PM Quote Reply Full Topic
discogodfather



Joined: 09-17-2007
Location: San Francisco, California USA
Posts: 202
Status: 
Offline
I had some problems with my transmisson mount and the rubber disc mount holding the shifter mechanism to the car body. Some ticking noises on hard turns and the shifter would pop out of gear pretty easily on harder turns, plus some weird vibrations in the shifter. The trans mount itself is just two pieces of metal with a rubber block sandwiched in between. It looked fine but after taking it out I could literally peel the entire mount in half with hardly any force at all. Rubber was mush.

I also replaced the top engine shock and both motor mounts. Solved all the problems.