View single post by Tom Bradley
 Posted: 12-01-2020 11:40 pm
PM Quote Reply Full Topic
Tom Bradley

 

Joined: 07-15-2013
Location:  
Posts: 197
Status: 
Offline
Make sure the nut at the back of the shifter mechanism holding it to the insulator is tight (assuming your trans is a Getrag 5-speed, see fig). Mine had a tendency to come loose and cause rattling until I put some thread locker on it. While you are at it, also check the "Grub screw". This also needed thread locker to stay on.

Attachment: 5-speed shifter.jpg (Downloaded 96 times)