View single post by DonBurns
 Posted: 04-14-2020 12:03 am
PM Quote Reply Full Topic
DonBurns

 

Joined: 09-18-2015
Location: Fullerton, California USA
Posts: 138
Status: 
Offline
Fortunately I thought to test fit the bellhousing to the block after I fitted the new clutch. Some mods are needed. The stud at the bottom of the oil pan needs to be removed, which is no big deal, but also the thin metal blank plate doesn't really match up. Need to trim to fit, and add some mounting holes so it doesn't rattle.