View single post by redracer
 Posted: 12-05-2018 05:42 pm
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 449
Status: 
Offline
Sorry you drilled a new hole: reslotting the "U" shaped bracket AND loosening the front 2 nuts for the rubber engine mounts(use a whelled floor jack to help moving it) should have given you good results.
As for the broken rubber tm. support, if you didn't get one from DELTA, a bolt with some old shock rubber would do the trick.