View single post by Rick in Miami
 Posted: 11-29-2018 08:27 pm
PM Quote Reply Full Topic
Rick in Miami


Joined: 02-17-2015
Posts: 48
Broke my shifter mount (Part # 17) today and was not able to get into 1st 3rd or 5th. Hobbled a couple miles home in 2nd and 4th. Had to cut the nut off the interior side of the mount as the stud was stripped. Apparently there had been a lot of sideways tension on the mount as the tunnel and shifter holes were mis-aligned. Checked Motor mounts to see if they could have been a contributing factor but they look OK.

Attachment: GearboxControls-5-Speed.gif (Downloaded 112 times)