View single post by Art DeKneef
 Posted: 11-20-2013 12:23 am
PM Quote Reply Full Topic
Art DeKneef


Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 330
Well on two of my cars here that are still somewhat original they have the protective coating still on them.

If you strip the fenders down to bare metal I would prime, cover with a black topcoat and then apply a good protective undercoating. Don't leave them in primer. Primer doesn't offer the protection a good topcoat does.

If you will never drive the car in the rain or snow you could skip the waterproofing but it's an extra layer of protection against the elements, stones, dirt and road debris.