The hp figures are healthy and if on the mark would be really strong, but the torque suprises me even more, at around 84 ft/lb ...   04-30-2006 12:07 pm

That is what I feared.  Trash trashed, thanks for the time savings on that one! ...   04-29-2006 10:59 pm

I'm replacing my oil cooler and hoses for the oil cooler, but I'd like to use the stock sandwich plate. Does anyone know the thread ...   04-29-2006 12:19 pm

Thanks for the help there! I did do a similar repair on my 5 speed, but it isn't the play in the lever/bushing, it is ...   04-28-2006 03:14 pm

I've spoken with him before,  I think he has moulds etc. too to do fender work etc. One thing that is interesting to ponder regarding Production ...   04-27-2006 07:45 pm

It is small, but as such we all need to get along - in 20 years there won't be many of us and we'll need ...   04-27-2006 05:21 pm

And to make it complicated those are all engine dyno numbers, which vary more than say Dynojet numbers. And, what we're likely to get in ...   04-27-2006 12:40 am

Brian, again, I definitely didn't mean anything negative by the use of "that thing".  In my Southern vernacular that is the way I speak about things ...   04-26-2006 08:17 pm

Gone   ...   04-26-2006 02:17 pm

Well, we got the Jensen out this weekend for the first test day it has ever been on.  We didn't really intend to race the ...   04-26-2006 01:16 am

How'd you road test that thing? I got your dizzy!  Seriosuly, that is cool.  Might be a very god thing for a lot of 5sp ...   04-19-2006 07:23 pm

Thanks for that, you know, as I was going to sleep last night I thought caster, but then still thought it would have an effect ...   04-17-2006 02:26 pm

I'm coming down the home stretch on the race car and looking to rough align my JH.  The JH suspension geometry is not one I've dealt ...   04-16-2006 11:29 pm

Well, after a false start with a bad engine and us building a couple more race cars in between for customers, we've got the JH ...   04-14-2006 01:33 pm

Judson Manning wrote: For a street car, 205 is plenty of tire which means a 6" wheel is really all you need.  I think the ...   04-10-2006 11:56 pm

Personally, I would not go for larger wheels for my street or race car.  Why? Well, larger wheels are generally going to increase in diameter ...   04-10-2006 09:31 pm

Another good one would be a Painless harness. They have off the shelf hot rod harnesses that are not specific for any car, they simply ...   04-09-2006 11:51 pm

Greg Fletcher wrote: On the cross drilled crankshafts- I know it sounds good, but keep in mind that Lotus raced plenty of non-cross drilled 200hp+ ...   04-09-2006 10:38 pm

Well, I'd suggest you have the motor timing incorrectly, or, have the valve adjusted improperly. These would be the basic two reasons so to your ...   04-09-2006 09:31 pm

for guys just looking for wider tires - 225-45/50-13 DO fit on the stock wheels with 5.5" rim width and the 13" Panasports with 6" ...   04-09-2006 05:17 pm

I sent my steering shaft off for a rebuild recently.  But, I have not gotten it back AND I've my first race in less than ...   04-09-2006 05:13 pm

Hi Dan, I'v built a fair number of motors over the 37 years I've been plodding around.  I SCCA road race so it sort of neccesitates ...   04-09-2006 05:00 pm

I don't know where mine was made. But, I did install it and we bled the system, man is the pedal firm. A new master ...   03-29-2006 11:23 pm

My says Lucas on it, but who knows in this day and age.  I will use it and let you know what happens.  I suspect ...   03-28-2006 04:29 pm

Got a new one from Victoria British for $100 even, just arrived two days ago.  Right here:   http://www.victoriabritish.com/features/t6/T6BR1.htm Ron ...   03-27-2006 11:08 pm

Ummmmmm, no. delta sells rebuilt racks for $300 plus a $500 core charge to make sure they gets yours back. I mised that all important ...   03-01-2006 06:18 pm

$100??? what a bargin! I was thinking like $339, but, I must be thinking wrong.  I'll check it out, R ...   03-01-2006 06:12 pm

That is what I am thinking. Anyone used like a Ford Pinto rack or similar? I saw one a few months ago I felt would ...   02-23-2006 06:51 pm

Anyone know if there is a bolt up replacement for this rack, or, where they come from? Mine is old, naturally, and could be in ...   02-21-2006 11:40 pm

If orginal air intake with snorkel that runs to front of car, yes, I would be intersested in that piece. Ron ...   01-11-2006 06:46 pm

Hey Jerry, I'll give a call Monday.  Already went up and back today, visiting family in the hospital but I will be back later this week.  ...   12-04-2005 09:19 pm

Hi Jerry, Do you have a home number I could contact you at? I might be in Burlington tomorrow (Sunday) and if you were receptive to ...   12-03-2005 11:53 pm

I didn't see what I needed, I need a photo of detail on the bar mounting to the lower arm. I should put some pictures ...   12-03-2005 06:07 pm

Anyone have some pictures of how the front swat bar mounts?  I'm trying to hook mine up and cannot remember how the dang thing bolts ...   12-02-2005 10:04 pm

Hi Jerry, Sold, I'll take'em all!  Shoot me an email or give me a number to call, thanks! Sorry, got the number right there, I'm an ...   11-29-2005 12:56 pm

I need some assorted parts to finish up the JH. The motor is out to Judson as of this week for some TLC, and while ...   11-27-2005 11:59 pm

The chamber volume is typically defined as the area in the head.  Typically, one finds this out by taking a flat piece of plexiglass with ...   11-16-2005 07:23 pm

What year did the TR8 get rear discs?  All I've ever seen are rear drums on TR8s and I've wrenched on more than a few. R ...   11-07-2005 06:32 pm

Joel, Once you let all the smoke out of the wiring harness all is lost.  At best you can get some replacement smoke but don't ever ...   10-20-2005 11:51 am

Hi Frank, It turned out pretty good I think, thanks for the congrats.  We got it done, basically ready for the first track outing, only to ...   09-30-2005 01:08 am