Hi i was just wondering if anyone has ever tried to fit the Jensen Interceptor seats into the JH. In search for more modern back support ...   06-03-2005 10:58 am

I know Garry Kemps, who is building my engine, is driving around with an LSD. Unfortunately i have no idea what type. If i get ...   06-03-2005 08:05 am

...sorry; message in the wrong forum. ...   05-25-2005 08:20 am

Hi Pete, thanks for the tips. I will first run the engine with Pertronix Ignitor inside the new distributor housing, with an MSD6a, pertronix coil and ...   05-11-2005 08:08 am

Mark, i will check the valve to see if it shuts. Over the weekend i had it out, disassembled, sanded, cleaned and painted and I reassembled ...   05-02-2005 02:42 pm

Hi all, whilst the engine is still not in, i have time to have a look at the brake booster. I will be replacing the old ...   04-28-2005 09:29 am

hi all, latest update of "The Shark":   I uploaded pictures of the recently finished subframe, front & rear suspension. Inspired by you who have been there before; ...   04-27-2005 10:53 am

What a great car! Very solid. Good luck racing it. Keep us posted. Erik ...   04-27-2005 10:36 am

Thanks guys, that was the answer i was hoping to get and a real relief. On to my next task: the gas tank...it has a ...   04-26-2005 07:54 am

when going through my "disassembling" pictures i found out the diff/axle was positioned precisely the same as it is now..off centred. see picture: http://shorpac.com/v-web/gallery/album67/IMG_0075 can anyone tell ...   04-25-2005 09:57 am

Can anyone tell me if my differential is correctly positioned? when looking from engine bay point of view (with engine still out), right through the tunnel ...   04-25-2005 09:53 am

Thanks for the compliments. I can't wait to drive it. The red pullies are the "QED" brand, they are adjustable and half moon type. I bought ...   04-20-2005 02:21 pm

Hi all, just updated my album at the JHPPG website with pictures of my brand new 2.2L 907 engine. Have a look. Erik Harkes ...   04-20-2005 11:39 am

Hi Dan, please tell me more about the damper, where you got it from and why it is a big improvement over the stock one. i'm awaiting ...   04-14-2005 09:57 am

Here are the SuperPro bushings (which btw are blue) i ordered at Revinton TR  (email: sue@revingtontr.com ) in the UK: Front suspension bushings: SPF0035K Front Cross Member ...   04-04-2005 09:16 am

I did the very same as Dan. I have recently replaced all bushings with SuperPro Polyurethane bushings and ordered all new (original) bolts and nuts ...   03-30-2005 10:14 am